Selling all my parts ?(nismo etc etc)

[Antony]

right guys, at the end of the month i am buying a 1992 toyota Mr2 mk2 GTi-16 for £800, done less than 100,000 miles and has been garaged for 4 years. spotless. unmodified, un molested and no smoke or steam or anything wrong at all.

so i need some cash guys and i have lots of stuff to sell.

nissan march rear nipples (baught off nex, got bulbs now too) cost me £27 and i havent fitted them, £25 posted.

custom carbon interior panels (rear 3/4 and boot panel) £50 (samyboi)

i have,
Re-conned cg13DE engine (new rings, bearings valve seals, valves lapped, all gaskets replaced, re-faced cylinder head etc etc) this engine has been built using genuine nissan parts from matt humphris and boxes are still available. cost of parts was well over £500.
done 0-miles (still on engine stand) £350 ono

Nismo Cup body kit. (comes with aj4 painted wide arch kit and cup spec spoiler with third brake light) £400 for both or £200 each ono

Genuine Nismo solid engine mounts, currently fitted to my car (all apart from gearbox mount wich is in my glovebox) were brand new, cost me an arm and a leg, £40 ono (sammyboi)

Pulsar calipers, fully refurbished with new sliders, seals and blasted calipers, re-painted in red, black diamond predator pads (loads of life left and an awesome pad) and ebc custom disks (drilled groved and vented) £250 for the lot ono

team heko wind deflectors one has some slight scratching, £10 ono (sold napster)

Nismo alloy quick shift gear lever, only done 3000miles works excelently, £40 ono (jowley)

Nismo gear knob, silver/black fade with nismo logo, £25 ono (samyboi)

Rota Slipstream alloys 15" matt black, in absolutely perfect condition with almost brand new tyres (kumho ecsta spt 195/45/15) comes with light weight red anodised nuts for £400 ono (open to sensible offers)

Bilstein and Eibach NME spec road springs and shocks with nismo adjustable camber front top mounts, these came off the NME chassis, nissan motorsport europe blue car. 35-40mm drop all round still in excelent working order, could do with a lick of yellow paint though..lol £200 ono (K6pfs)

brand new 4 point red momo harness, been fitted to my car but i still have the box and have only had it in a month. £35 ono (jowley)

Willans harness black 3 point clip in harness, still in excelent condition £20 ono

Cobra clubman bucket seat, black, could do with being re-uholstered (some holes in it) £20 ono

diffuser rear bumper (square pants and raceworx made it) excelent condition, painted in aj4 red upto where the arches fit and in silver under that, £15 ono

E-tech nismo copy front strut brace excelent condition £30 ono (joe.powell)(posted)

richbrook steering wheel leather with silver middle, some marks on the silver metal bit, comes with mountney hub adapter and D1 red anodised snap off hub too, £80 ono (jowley)

its a Super S and it runs so anything else you want off it come down and have a look, make me an offer.

i also have an old janspeed manifold with some blow holes in it, any competant welder could fix in 10 mins, £30 ono

Spacers 35mm, paid, (posting monday)

all collection (apart from harnesses) from DN345TN

would sell the lot on the car for £1000, N757 FLH, MOT till march 2010, brand new centre cat and lambda, tax till 31/10/09
H1 fog light hid's (1 fitted, 1 boxed)

could do with a re-spray but chassis is solid. welcome to look. (Y)(Y)

and no im not going any where, ive made too many friends on here to leave..lol

 

[solarice]

suprised to see you selling up...but good luck with it the sale and the new car

 

[Antony]

thank you, i never ever thought i would, but this mr2 is realy just too good to miss. lol

i didnt even want a new car but you know how it is, it just popped up and im having it..lol

 

[solarice]

lol, yeah...theres a few cars id have now if id had the cash handy.

 

[squarepants]

i want my old harness and seat

 

[nexussteve]

This all K11?

 

[wgc_daz]

can i have a pic of the slipstream and nuts? tempted for my starlet

 

[k6pfs]

Hi Ant,
put me down for the
Bilstein and Eibach NME spec road springs and shocks with nismo adjustable camber front top mounts, these came off the NME chassis, nissan motorsport europe blue car. 35-40mm drop all round still in excelent working order, could do with a lick of yellow paint though..

 

[Antony]

no probs dude...done.. (will be end of month before i can take them off mind as i havent actualy bought the mr2 yet..lol)

yeah sure, hey Square pants if you want them you can have them..lol

pics coming up.
http://www.micra.org.uk/showthread.php?t=14567&page=3
pics on this page..(Y)

 

[mukydarry]

ill take the wind deflecters

 

[Antony]

sorry, wind deflectors sold to napster. hes allready payed for them...

 

[jowley]

ant are you willing to post im interested in the steering wheel an hub, gearlever an knob, 4 point harness and solid engine mounts

 

[hoodedreeper]

You have PM

 

[Alienfish360]

would you take 20 for shifter?

 

[Antony]

ant are you willing to post im interested in the steering wheel an hub, gearlever an knob, 4 point harness and solid engine mounts

yes i am willing to post dude. :blush:

steering wheel and hub are available, gear lever an harness are available but sammyboi has beaten you to it with the engine mounts and gear know im affraid. pm me and ill put your name down. (Y)

i cant take £20 for the shifter dude, it cost me £80 and its in A1 condition

 

[squarepants]

yeah sure, hey Square pants if you want them you can have them..lol

yep sure dunno how iam gonna pick them up atm lol.

 

[curtis]

Mate if you need to sell those Rota's, do so, as im not in a great position to have them right now...

 

[pjg1979]

Alright Ant, Don't know if I'm going blind, but are those Spacers for sale? Or don't you have them anymore? I'll offer £15 posted if you do.

 

[Alienfish360]

i cant take £20 for the shifter dude, it cost me £80 and its in A1 condition

I'll pass then, there's a few from other cars that fit, that are CNC machined for £30ish new, that work exactly the same as the nismo one, I'm not one for paying for brands

 

[micra oli]

i am interested in the open mouth grill.
i'll pm you, but i can buy it after the 28th (payday!) lol

 

[NeX]

would you do me the engine mounts?

 

[micra oli]

also, what about the front bumper?

 

[Alienfish360]

Could you post a photo of the short shifter and it's branding also please?

 

[squarepants]

mate iam gonna have to leave the harness and seat. been to the bank and i have less money than i thought lol...plus iam gonna struggle to pick it up.

dan

 

[Antony]

spacers are for sale yes. i would take £20 posted as its gonna cost me about £7 to post them.

The quick shifter isnt a nismo one im affraid, came in a nismo box and looks identical with the blue alloy clamp at the bottom and chrome polished shaft, but its not a nismo one. (works the same)

no probs Dan,

nex dude, samyboi has got the engine mounts im affraid.

the front bumper is available, but someones gonna have to help me get it off as i tried before and gave up whilst finding bolts..lol
there is no open mouth grille anymore, i went for a stock one in black.

thank you for the interest guys..... please bear in mind this lot is quite rare and has been in banzai, is recognised all around the country and is up for silly low money..

thank you...

 

[jowley]

does the strut brace go along the back of the engine bay or across like the whiteline??

 

[Antony]

i cant remember. its the one that matt sells...erm..ill have a look in a mo..lol



Answer... straight across. it goes up and accross and down like the whiteline one does, although mine rubbed on the bonnet a bit i think my bonnet is bent..lol

 

[Alienfish360]

The quick shifter isnt a nismo one im affraid, came in a nismo box and looks identical with the blue alloy clamp at the bottom and chrome polished shaft, but its not a nismo one. (works the same)

So... £20?

 

[Antony]

hehe, i admire your tanacity phill, but its allready gone im affraid.

 

[pjg1979]

spacers are for sale yes. i would take £20 posted as its gonna cost me about £7 to post them.

Alright Ant, I'll get back to you on that one.(Y)

 

[jim_bling]

ant if sammy doesnt take the rear quater bits and the boot carbon fibre bits can i go for them will even come collect them dude saves me gettin them new and are they in good nick

 

[Antony]

they are in excelent nick, been drilled to fit, (so no need to drill them again) and the rear boot panel has some sealant on the back, but should realy be riveted in pace...

 

[Tom 1.0]

hi ant,

what size are the spacers? would they require extended bolts?

 

[Antony]

they are 35mm and no they come with extension bolts.....

 

[Tom 1.0]

whats the best way to pay you?

postal order or cheque? or if you are with abbey national i could do a bank transfer for you.....?

 

[Antony]

naah, im with hsbc dude. paypal is easiest. fastest too.
my paypal is antony_aiken (at) yahoo.co.uk

 

[Tom 1.0]

ok cool,

i will get one setup and sort some money out for you,

would be able to do this on tuesday?

say £25 as you'd have to wait until then..... lil bit o' compensation?

Tom

 

[Antony]

yes tuesday is fine dude. ... no rush, the car will be taken off the road before the end of the week and stripped of all the parts listed above. thank you.

 

[Tom 1.0]

awesome (Y)

for spacers and studs (Y)

will be done tuesday, thanks ant!

 

[tiny big]

janspeed manifold

How much would the postage be on the janspeed exhaust manifold please?-Jon

 

[martinb]

damn wish i ahd seen this earlier, tom 1.0 if the spacers fall through ill take them, i have paypal waiting ant if he dont take them mate!! damn im too slow!!:down:

awesome (Y)

for spacers and studs (Y)

will be done tuesday, thanks ant!

are you planning on arches mate?

 

[Alienfish360]

Are you breaking the car?

 

[Tom 1.0]

hi ant,

sorry i have been ill so i havent been able to put any money in my bank acount,

i will do the transfer asap tomorrow when i get it in,

sorry.

damn wish i ahd seen this earlier, tom 1.0 if the spacers fall through ill take them, i have paypal waiting ant if he dont take them mate!! damn im too slow!!:down:



are you planning on arches mate?

............:blush:

 

[Antony]

How much would the postage be on the janspeed exhaust manifold please?-Jon

sorry dude. burger may be having the manifold if he comes to look at it on friday..

Yes phil im breaking the whole car, or whats left anyway...lol

sorry i havent been on, lost tinterweb connection on sunday and just got it back.

NOTE TO ALL WHO HAVE NAMES NEXT TO PARTS: payment would be appreciated for the end of the week if possible so that i can get the parts to you asap (if being collected i can wait untill wednesday) (Y)(Y)

thanks guys...

 

[Alienfish360]

How much for the ECU loom plug, or even just for 3 or 4 pins with 2 inches of wire on from the plug?

 

[Antony]

not yet dude. but if worst comes to worse and i need to take the ecu out before the end of the month, you can have the whole ecu, imobiliser, key and fob for £20...

 

[Alienfish360]

I don't need the ecu, just a few pins from the wiring loom plug not the ecu side.

 

[Antony]

ah ok i see, im not that far stripped at the mo, (still driving it) but as soon as the brakes and shocks come off, ill strip the loom too. then chop the plugs off for you... £5??

 

[Alienfish360]

that's fine, just let me know when they're off and I'll let you know if I'm still good for it.

 

[Antony]

ok dude. im gonna start to take off the majority of the parts listed on saturday, minus wheels suspension (for now) and brakes. (so i can still move it)

Also available is a set of NEX special Nismo copy white dials. electric windows (in the doors obviously) Brand new catalyst (less than 1000 miles) brand new lambda (again less than 1000m) cylinder head, alternator, starter motor, gearbox, distributor, Red wrinkle rocker cover (newly painted 3 weeks ago) (all other anciliary parts available) just ask...