Porks bike carbs and boost project

[pork]

Think I'm gunna try this strip....

.....also supercharger mount 3.0, try and bend that you bastard

 

[andre_f_carvalho]

Not bad, try an oder color

 

[h701micra]

I was gonna say use the same colour as your engine bay... but I didnt have permission to write that apparently

 

[pork]

It's black again now, but green might look cool

 

[andre_f_carvalho]

Talk with Chip Fuse ahah it's a master

 

[pork]

Jus need air con model alternator bracket to finish it off

 

[Belly93]

looking good as always neil elmo doing his quality inspection again i see

 

[pork]

Finished up new bypass valve which is operated by a 7psi actuator .....

Quick vid, opens better then this now


On supercharger outlet.....

Then this gets plumbed Into turbo

So now it's s/c > turbo

The bypass valve will regulate s/c pressure and also be a direct inlet for turbo, there's no clutch this time so the s/c will also vent to atmosphere thru this, to reduce drain if power from s/c

 

[Dougyledds]

More i look at the steels the more i want them back!

 

[pork]

Haha, well I am tempted to sell them for some rb8's

 

[McMicra]

Extreme offset wheels, DO IT!

 

[pork]

Why do I never wait/research properly lol

Just received the air con model alternator bracket, I thought it was small, but it's huge, but in a good way!

So I'm scraping my mount.....again..... And making it up on this, it's bang on for the size of the charger

 

[h701micra]

Dude you'll have a pile of mounts to sell

 

[pork]

Haha, I keep chopping them up, free metal.

Can't believe how good this bracket fits!

Wish I knew about this when I first come up with idea of using the charger!

 

[h701micra]

The GA one is pretty massive
Comes with built on idler pulley too

 

[pork]

That would me handy!

 

[h701micra]

CGs have an idler pulley on the back for pas don't they?
Could weld that on or something

 

[pork]

And that's all that was needed!

 

[pork]

CGs have an idler pulley on the back for pas don't they?
Could weld that on or something

I put an idler on the bottom hole for the engine mount, to direct belt for new alternator position.

Hoping to fit it all tomorow

 

[h701micra]

I put an idler on the bottom hole for the engine mount, to direct belt for new alternator position.

Hoping to fit it all tomorow

Awesome man
Looking forward to it

 

[sr20bud]

jesus been a long time since ive seen this has come on a long way dude! awesome work

 

[pork]

Cheers!

S/c on....again,
Much better figment,

Alternator tensioner

 

[pork]

I need to drive to the workshop to make a new sump return

How long can I drive the turbo with no oil going thru it?
It's bit that far, I jus dint wanna disassemble again

 

[frank]

i ran mine with no oil feed here neil, just prime it or block the return and fill the core first

 

[pork]

Cool, it's only 0.4 miles away

 

[l_jonez]

Make sure the waste gate is jammed open so that there's less going through it.

 

[pork]

Will do

 

[Belly93]

I have pmd you with a question on parts so im.not filling your blog

 

[pork]

Today I managed to reposition the oil return on the sump and mount final bits of supercharger

Started it up......no belt slip !
Sounds badass!

Took it for a spin, but the fuel map is all over the place now so need to do a few hours with auto tune when the laptops plugged in.......if the mrs and baby lets me out that is lol
Only getting an hour or so a week to play now

 

[pork]

Oooh and do some wiring as I left these resting on turbo! All went bang.....but that's why we have fuses, nothing's damaged, phew

 

[pork]

Not a good day!!

Been for a drive....it's awesome, that's that.

Then I stripped the belts

Managed to get to a shop before battery ran out and over heated! Water pump belt had 1 rib left

So changed belts on the road kol

Then a few speed bumps later smash in the exhaust......this happened!!

 

[Huggy444]

The joy of modified cars eh
Bet it was fun whilst it lasted though

 

[pork]

Sounded good tho

 

[l_jonez]

How much bad luck can one guy have!

 

[pork]

I know!
Can't believe it all happened in an hkur

 

[pork]

Exhaust was still there this morning!

 

[pork]

How hard are sills to fix ?
I wanna swap my engine and gubbins over to a better shell, found one going for £200, good car, But about 10inch if sill is rusted, apart from that it's ok

 

[solarice]

Basically same as any welding but it depends how far it's gone on the inside as for how much time it'll take...i replaced the k11's on mine without any issues.

SC sounds insane, can't even hear the one on mine

 

[Noddie]

If you are gonna reshell surely its worth finding one which doesn't need welding?

 

[pork]

It was jus the sill that needs doing on it.
And 2 mins round the corner from my house.
Mines got a crumpled up arch,
A lot more work to fix mine than this other one.

 

[pork]

Managed to replace the meted wires this afternoon

Tucked them away and shielded it with some heat reflective tape

Drive home with no exhaust, stupidly loud!!

Beings it's off, gunna put a mid silencer on and try and tuck it further up.....raising suspension is not an option lol

 

[pork]

Going through stuff on the laptop, the most my pedal opens the throttle is 80%.
How can I extend the travel of the pedal? Bend it, cut home in the floor?

 

[pork]

Hole

 

[l_jonez]

Have you actually checked the TB?

Might just be the tps needing recalibration.

 

[pork]

I Callibrated the tps via the throttle, (recently, before I done it manually, don't ask why)

 

[karlj]

Shorten the throttle cable?

 

[pork]

Doesn't quite work like tvat

 

[karlj]

Have you had someone press the throttle whilst looking at the butterfly?.... Might sound stupid but maybe the throttle is open 100% but not being registered

 

[pork]

I set it via laptop manually (by hand)
Then realised the pedal doesn't open fully

 

[karlj]

I should put a drunk disclaimer in lol

What about shortening the stroke of the peddle?