• Please only use these forums for blogs, they are not a discussion forum

Boosted SR20DET K11 Micra

Everything nearly finished now!

Engine out fitted the LSD box, new clutch and engine/box painted silver... manifold also sprayed with VHT paint.

e267a22f.jpg


GTi brakes on with Goodridge brake lines.

260b589a.jpg


Front/Rear ARB and panhard rod fitted. Will need spacers for the front to stop it touching the gear linkage and manifold. Had problems with the rear arb will need drill out the snapped stud.

7b7c8a1d.jpg


47157463.jpg


baf60ff8.jpg


37cc0236.jpg


Recaro Seats fitted

bf89932d.jpg


0342d0f8.jpg


Raditor on with two slime line fans

ab42ba5b.jpg


Nismo Strut brace on


Booked in Unique exhaust on thursday cause no exhaust atm... getting 2.5 mandrel bent system with either a SPOON N1 backbox or a Skyline R34 backbox

2rnfxc3.jpg



Well thankfully everything is done...

Had to get the passenger side shaft shortened cause of the lsd

Had to make custom ARB brackets so it doesn't touch the shifter

Rear panhard and arb fitted

8cf4f1e1.jpg


0f964d83.jpg


0f964d83.jpg


Also got the water pipe on the head custom made so i could mount the rad pipes properly.

98db60c2.jpg


Half under sealed

7f57b90f.jpg


Had a go in it no problems at all :biggrin:

Will sort and tidy up all tomorrow hopefully
 
Lots of hard work and you're almost their Mov! Nicely done mate. Must say it sounds like a beast when you fired her up. RAR!
 
Love the project man. Respect (Y) Love the idea of painting the rocker cover. Good luck and hope to see her rollin soon grr

Cheers from Slovenia,
Alex
 
Absolutely beautiful! Fantastic workmanship, it looks like a factory job, very very nice work man. (Y)

If you ever decide to sell it, give me a shout.
 
Absolutely beautiful! Fantastic workmanship, it looks like a factory job, very very nice work man. (Y)

If you ever decide to sell it, give me a shout.

Thanks pal for all the positive comments through out the build.

Wont be selling it yet... im either going turbo or sr20VE next :grinning:
 
That looks proper quick, are you using a shorter range gearbox or is it all SR20 gear?

I am lead to believe from reading the thread he has a standard box with LSD fitted! :)

It's a totally marvellous car! :) did you register it as a 2.0?

Pepper
 
Looking good mate well done (Y)

Thanks

That looks proper quick, are you using a shorter range gearbox or is it all SR20 gear?

Autech LSD gearbox

I am lead to believe from reading the thread he has a standard box with LSD fitted! :)


It's a totally marvellous car! :) did you register it as a 2.0?

Yep LSD from the autech...

Pepper

nice work mush. love the cam cover. (Y)


Thanks
 
Long day today but well worth it

Went today morning and finally got the exhaust done with SPOON backbox it sounds awesome

Few pics of Phil doing his magic he even fitted my lambda sensor in a new position

On the way back whilst weighing the cat in I weighed my micra

820kg with a sr20!!!!

Then headed off to a dyno to see what it's pushing

Got a nice surprise with just a stainless Mani/exhaust and blitz induction kit

I got


142
127 lbft


Exhaust1.jpg


Exhaust2.jpg


Exhaust3.jpg


Exhaust5.jpg


Exhaust5.jpg


Exhaust6.jpg
 
impressive mate (Y) whats next cams? you probs already know this but if you fit the high port intake cam from a early prim or sunny gti ect you should see a 5-7hp gain i did it when i put the low port in my n14.
 
Car's looking awesome mate - stance is absolutely spot on, body modifications look good (love how you can see the twin fans through the front grill (Y)), and sounds like you've ended up getting a good power-to-weight ratio from the SR20 conversion. Any plans to try get that figure a bit higher? Would love to see a 200bhp+ SR20 Micra :laugh:. Good work though (Y)
 
Aha, the notorious Little Bandit. This one's dead, is it not? Still mad though, especially in a car that size and weight
 
Holy #### man, shame. As long as he was ok though. Just watched the crash vid, looked pretty bad. 409bhp in a car that weighs 800kg is just madness. Surprised he kept it FWD though, would have thought he'd go with 4WD, or at least RWD
 
again nice work chief (Y) every time i read this blog it makes me want to do a sr20 conversion but i know i wouldn't be able to stop myself and end up doing stupid things ive still got a gtir turbo manifold sat here :laugh:
 
Back
Top