what did you do to your micra today ?
- Thread starter frank
- Start date
gtsnissanb
Official MSC Trader
What do you mean mate
Blue wire goes to fog
Red wire is brake light
Connect the black and brown wire together then join them to the sidelights
Yellow wire left indicator
Green right indicator
White wire vehicle earth
You just then need to crack out a test light or multi meter turn each light on one by one test each wire till you find the one you want that's how I do it and I do it every day
:doh:
i know am just been xxxxing stupid am just having a bad day cheers anyway fella
bad day? try shoving your hand up the toilet trying to get the wet n dry hoover cap back out
not before undoing the manhole cover out doors only to find 3-4 black widow looking spiders looking at you saying "come on son lets be having you then" :grinning:
OP
OP
frank
Club Member
pulled my gearnob off while racing a scooby lol ( crossed the line with a box full of neutrals :doh: )
http://www.youtube.com/watch?v=9oaxFTYIQVw
http://www.youtube.com/watch?v=9oaxFTYIQVw
Shaun
***StaGGeRed***
OP
OP
frank
Club Member
cheers shaunJust watched them 2 new vids
Awesome stuff apart from the knob incident lol
that 2nd one was a 15.4 (Y) come-on low rider, you,re falling behind 
Attachments
thats very good, apart from the knobing around:laugh:
Just watched them 2 new vids
Awesome stuff apart from the knob incident lol
wheres the 2nd vid?
OP
OP
frank
Club Member
todays uploads from shakies z, 3 now
volvo 840R (2.3+t ?) scoobie and honda prelude
Shaun
***StaGGeRed***
On Frank's channel.
got them, like this one
http://www.youtube.com/user/aelknarf#p/a/u/0/1wr8PRaY3OI
http://www.youtube.com/user/aelknarf#p/a/u/0/1wr8PRaY3OI
k11_whore
Steve :)
Hmmm took her for a drive and noticed a clicking noise when turning left or right, even if its not on full lock, i know nothing to do with my track rods as theyr fixed and that noise has gone just noticed this one, any ideas? sounds like comin from back left hand side sometimes
phil.marsh
Buy & Sell Member
I was driving to work and all I heard was crunch crunch crunch. And my car stopped. Turns out I've seized my gearbox
gtsnissanb
Official MSC Trader
I was driving to work and all I heard was crunch crunch crunch. And my car stopped. Turns out I've seized my gearbox
I'm guessing mine will be with you tomorrow
phil.marsh
Buy & Sell Member
It should be! Your an actually life saver supposed to be picking my bro up from the airport on Saturday evening.
supposed to be picking my bro up from the airport on Saturday evening.
k11_whore
Steve :)
http://m1230.photobucket.com/albumv...D2o0/hEZws1UZ5Vuq3pFE2MjPgeOELWvJBYMX+ZdBP98s sticker bombed center console with lego characters
gtsnissanb
Official MSC Trader
It should be! Your an actually life saver
Is it all in and working?
Shaun
***StaGGeRed***
Painted the slots today:
Also painted my 3rd brake light black but got no piccys as it's not really anything of interest...
Don't really know what to do with the slots really, I kind of like them completely black but i think they deserve at least the lip polished...
We shall see.
Also painted my 3rd brake light black but got no piccys as it's not really anything of interest...
Don't really know what to do with the slots really, I kind of like them completely black but i think they deserve at least the lip polished...
We shall see.
http://www.youtube.com/watch?v=1wr8PRaY3OI&feature=channel_video_title
Wow frank, you blasted that Prelude, right into the trash bin , like we say in french: "POUBELLE !"
Wow frank, you blasted that Prelude, right into the trash bin , like we say in french: "POUBELLE !"
try the wheels as are first shaun , look good like that
de,cat'd standard k11 exhaust system yesterday- fully synthetic magnatec 5w 30 a1
http://magnatec.castrol.com/en/product-range/product-detail/5W-30-A1/
( its not easy being the r-reg-sr try play games and you'll see what i mean)
and new oil filter today
let 1.5 litres of the old oil out first topped up with remaining cheap wilkinson oil,went for a long run to flush some more
let engine cool off then drained
all that'd be missing is a visit to doctor frank hmmmmm :grinning:
de,cat'd standard k11 exhaust system yesterday- fully synthetic magnatec 5w 30 a1
http://magnatec.castrol.com/en/product-range/product-detail/5W-30-A1/
( its not easy being the r-reg-sr try play games and you'll see what i mean)
and new oil filter today
let 1.5 litres of the old oil out first topped up with remaining cheap wilkinson oil,went for a long run to flush some more
let engine cool off then drained
all that'd be missing is a visit to doctor frank hmmmmm :grinning:
Went past 52000
But on the better side, she now has front fog lights (Y), they'll work too if I can find a suitable relay for them.
i got exact mileage as you:grinning:
yesterday not today i had a appointment with the dr, which i messed up and ran out of petrol on the m6 near junction 2, out of luck pump was 2 miles away, so i walked of with the navigator and folow'd it
made it to "the mans" spot hours late, and couldnt really moan if he told me to ree book :grinning:
but he/we, well more he-----got on the corsa b set up and plenty of tea's as he has a tea tree.
as work got started all of a sudden their was a hand thrust up close to my face with a key on the end of it :grinning:
ok so i got into this machine and started i'm up hmmmm, only thing i can say is i wish i hadnt driven him as me being a driver i really wanted to drive back home with this car! the handling set up - matiz stuff i believe - was gripping like anything the power:grinning: once round the way turn'd into 2 and a uphill go, oh boy(my sr wanted to abandon me and stay with frank)
this corsa b set up ended up to be spot on it doesnt bang and knock about over these shagout roads:grinning: keeps good traction at high speed :grinning: suprised frank too and me much more
some springs for the rear were already prep'd ready to go on with the shocks for the b's
absolutely no rubbing back or front!
these 14" steels with dish are lighter than the sr rims (felt like it to me)
vids showing the ride you/ i gots now. only noise is my spanners jack in the boot , r-reg is a driver/rider always will be :grinning:
http://s781.photobucket.com/albums/yy97/DRAGONZ_photos/?action=view¤t=MOV02350.mp4
http://s781.photobucket.com/albums/yy97/DRAGONZ_photos/?action=view¤t=MOV02351.mp4
they even handle big speed bumps! top mod frank mate big thanks
thought id post something a little better now im on my laptop haha!!!!
drove 370miles today and the little beast didnt miss a beat
time to change the oil next few days as its been 6 months since the engine went into my car!
also i have a slight ###### of an oil leak from my oil beather on the side of the cam cover and its just dribbling out when running so ill have to either get an oil catch can or a small elbow to make the breather face upwards and then attack with brake cleaner to clean up the mess!
drove 370miles today and the little beast didnt miss a beat
time to change the oil next few days as its been 6 months since the engine went into my car!
also i have a slight ###### of an oil leak from my oil beather on the side of the cam cover and its just dribbling out when running so ill have to either get an oil catch can or a small elbow to make the breather face upwards and then attack with brake cleaner to clean up the mess!
euro_micra
Matt :)
Looking low r-reg, could go lower? And are those franks reversed rims, they look good, what tyre size you putting on them?
everything would depend on rubb factor , i wouldnt want any for sure
one of the main points of these rimz is having the option to put the standard tyre saving dough
edit ---- yes franks rims
Dave_Ally
Ex. Club Member
Well today we have got the front fogs working in a temporary configuration until a solution can be figured out on how to get the stalk wired up properly. For now, using original stalk with front fogs coming on with the back also as only option. That will have to wait for another day. Looks infinitely better with them in and working, very pleased. :grinning:
Also, now have attached my electric mirrors from a Japanese March and got the mirror part working. Just need to get the folding part working which seems to be needing some wires running into the back of the control switch from the fuse box or somewhere in the loom. Painting to follow, as well as the rear spoiler from a Sport+. Getting quotes for the spoiler & mirrors as well as the front and back bumper.
How she looks right now:
Also, now have attached my electric mirrors from a Japanese March and got the mirror part working. Just need to get the folding part working which seems to be needing some wires running into the back of the control switch from the fuse box or somewhere in the loom. Painting to follow, as well as the rear spoiler from a Sport+. Getting quotes for the spoiler & mirrors as well as the front and back bumper.
How she looks right now:
dg_unit
Club Member (Trial)
Noticed a wheel nut has fallen off my front OS wheel Never had that happen before.
Also got a hoard of goodies from the scrappies in beige: Door pockets, new boot struts, under glove box tray, original micra fitted floor mats, colour coded number plate nipples, rear wash/wipe switch :grinning: Onwards with the spec upgrade!
Never had that happen before. Also got a hoard of goodies from the scrappies in beige: Door pockets, new boot struts, under glove box tray, original micra fitted floor mats, colour coded number plate nipples, rear wash/wipe switch :grinning: Onwards with the spec upgrade!
euro_micra
Matt :)
I changed the gearbox oil for the first time. Used a fully synthetic Castrol 75-90. Change went well, had to chop off a foot of hosepipe to reach the filler-hole. Also repaired the wheel centre-cap fastener, good to have four matching wheels again
And finaly got a decent 0-60 video. Run wasn't great, came off the clutch too slow, and ground wasn't smooth, but I got a video of the dials in shot finaly I make it 10-11seconds. Have done much better before.
[video=youtube;AWPOQBO0IFk]http://www.youtube.com/watch?v=AWPOQBO0IFk[/video]
cg10 engine, cg13 cams, ga16 airbox & 1.5" CAI, K&N panel filter, stock weight
And finaly got a decent 0-60 video. Run wasn't great, came off the clutch too slow, and ground wasn't smooth, but I got a video of the dials in shot finaly
I make it 10-11seconds. Have done much better before.[video=youtube;AWPOQBO0IFk]http://www.youtube.com/watch?v=AWPOQBO0IFk[/video]
cg10 engine, cg13 cams, ga16 airbox & 1.5" CAI, K&N panel filter, stock weight
