pjg1979
THIS IS MY BOOMSTICK!
Good afternoon Folks, Finally fitted my Cherry Bomb exhaust, it looks sweet but I'm going to finish it off tomorrow.
Step 1 - Got myself a Ripspeed Twin Exhaust Tip.
Step 2 - Fit it to the Cherry Bomb Exhaust (thanks to Olly98).
Step 3 - Permanently Weld the Ripspeed Tip to the Exhaust.
Step 4a - Check to see how far it'll stick out and make some fine adjustments.
Step 4b - Just another Picture also did measurements at this point for exhaust brackets.
Step 5 - Welded exhaust brackets onto the cherry bomb so it'll be a direct swap.
Step 6 - Finished product, erm didn't take into affect that I had to make holes in the bumper, so Friday afternoon I shall be knocking off another inch so it won't stick out so far.
So what do you guys n' gals think?
Step 1 - Got myself a Ripspeed Twin Exhaust Tip.
![452148109dd215fa9.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2F452148109dd215fa9.jpg&hash=d0ca610f509b3902aaab48159b291b0c)
Step 2 - Fit it to the Cherry Bomb Exhaust (thanks to Olly98).
![thum_452148109dd23d0ac.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109dd23d0ac.jpg&hash=ce36caf0acb6ca14fe6da19d7b5b9a5e)
Step 3 - Permanently Weld the Ripspeed Tip to the Exhaust.
![thum_452148109dd27531d.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109dd27531d.jpg&hash=e7c4a8eab2b8f8fe52f2cb6cfe702456)
Step 4a - Check to see how far it'll stick out and make some fine adjustments.
![thum_452148109df851240.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109df851240.jpg&hash=56c69151e322f003478618c7b40cc88d)
Step 4b - Just another Picture also did measurements at this point for exhaust brackets.
![thum_452148109df9be709.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109df9be709.jpg&hash=6fa074b90546dc1cff281eaef3085fed)
Step 5 - Welded exhaust brackets onto the cherry bomb so it'll be a direct swap.
![thum_452148109dfa77a20.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109dfa77a20.jpg&hash=4cc4da80d3453d095e0a40e4cf90f39e)
Step 6 - Finished product, erm didn't take into affect that I had to make holes in the bumper, so Friday afternoon I shall be knocking off another inch so it won't stick out so far.
![thum_452148109f0cc364a.jpg](/proxy.php?image=http%3A%2F%2Fwww.micra.org.uk%2Fimagehosting%2Fthum_452148109f0cc364a.jpg&hash=ebaf2df6fa473bec29479ed314a81493)
So what do you guys n' gals think?