ga16 stuff

[frank]

dale on the aoc has some parts for sale :grinning:
jwt s1 cams £250
fidanza flywheel £150
stage 4 clutch £50 suit cg13 turbo ? (1000mls use i believe)
brakes etc

http://www.micra.org.uk/attachment.php?attachmentid=17865&stc=1&d=1290549797
http://www.micra.org.uk/attachment.php?attachmentid=17866&stc=1&d=1290549797

 

[karlj]

i'll take the clutch could you give him my details please i'll pm them to you frank

 

[nexussteve]

These would've been good about a month ago.
Skint now! ######!

 

[Scott]

Bargain for the clutch. They are 180 dollars new plus the expense of getting it here!

And JWT no longer make these cams for the GA.

 

[frank]

dale still has his mera stainless steel catback for sale (£100) stock k11 compared with it, and wheel and boss (£60)
and that cheap yard i use in brum is breaking a rear disc slx btw 0121 753 4114

 

[baguete]

Thanks to Frank i now own the flywheel and clutch (Y)

 

[superls]

frank, where is this guy dale based? that exhaust would save me alot of work

 

[Scott]

Hes in the West midlands somewhere

 

[frank]

Hes in the West midlands somewhere

yes 5 mins down the road from me lol :grinning:
there are some better pics in his aoc thread scott btw

 

[Ed]

Shame this car came to bits. It was a unique car and one I had put a lot of time into.

 

[superls]

yes 5 mins down the road from me lol :grinning:
there are some better pics in his aoc thread scott btw

bit far for me to come for an exhaust oh well.

 

[frank]

and that cheap yard i use in brum is breaking a rear disc slx btw 0121 753 4114

i saw that axle today, it is removed, complete and vgc (all the bolts came out of the bushes no probs) £50
and the engine is an auto 1.3 (50k miles) the closed deck block type i assume (£80)

 

[r-reg-sr]

original killer prices dont know how you do it?

 

[baguete]

If posting were cheap, i would want that axle... :down:

 

[C0llis0n]

is that the cheapest 1.3 they have Frank?

 

[frank]

is that the cheapest 1.3 they have Frank?

its the only 1.3 they have joe, loads of 1.0,s tho, and they weighed the 2 cga3,s in :suspect:
i would put money on the milage being gen tho (the mani and cat bolts flew out no probs )

 

[will930]

what would be required to swap the rear axel over frank? like would it literally bolt on and bleed the brakes etc?

 

[superls]

frank, could you pm me your or his postcode, to see roughly how far it actually is for me??

cheers

 

[frank]

its got all the rods and stuff attached will, so you can either take the bolts out of your chassis or just the axle

and B94TL scott, m6, then aston expressway, then about 2 miles of ringroad

 

[pap29]

interested in the engine frank, have you got it or is it at the scrapyard? what your ohnest opinion on the condition? thanks(Y)

 

[frank]

sorry pap its the yard,s engine an the mani and cat bolts came out like it was a low miler

 

[Robbie 733]

Just out of interest, do those Cams fit a 1.3i, and if so, are they a vast improvement over the standard kit ?

 

[Scott]

No they are for a different engine

 

[Robbie 733]

Thanks Scott, did wonder if the 16 in the title might have been a clue to the engine size ! :laugh:

 

[nexussteve]

Might be a bit late now, but are the cams still available??

 

[frank]

Might be a bit late now, but are the cams still available??

they,re in scopez,s car i believe

 

[nexussteve]

Balls!
The GA16 is going back together soon and I'm on the look-out for upgrades before it's too late!

Thanks Frank

 

[frank]

wes had some jwt cams for sale (with less overlap for turbo) not cheap tho
http://sr20nation.com/ga16forum/sho...ams-and-worked-coated-cylinder-head-available

 

[nexussteve]

Yeouch! No kidding! :/
I'm sticking N/A also. Modest power for me! ^^