what did you do to your micra today ?
- Thread starter frank
- Start date
mas12555
Rare parts nerd #JDM
I got a headache just looking at all those wires!good luck matt
WDIDT ? piggybacked my pre-nats ecu into the red car (for engine testing purposes) ended up with 19 unused wires ! (nats/idle/speed sensor/g/box sensors/consult/cvt/aircon/ps/o2 heater/rear screen/abs)
View attachment 25580
OP
OP
frank
Club Member
aye its a bit of a rats-nest innit
but you only need to connect about 20 wires tho (4 injector earths/maf,tps,cts,lambda,cas signals/some feeds and some earths)we threw a test engine in too ( held in place by 1 bolt and a slick tyre
)
As you overtook them of course ???
While doing a j-turn cuz micras are that awesome
skymera
Brutal Honesty
Stereotypical, but have you tried a Saxo or 106 forum?
17yr old 1.1 drivers will moisten themselves over it.
Haha not yet no, got it for free big ass stainless steel 5" mofo im sure, need to double check actually :L
good shout though ill have a nosey
Measured it its 4" :L
Best go hunt down some saxo boys.
I expect it to go as soon as I post a thread for it for £60 :L
and almost died at
Best go hunt down some saxo boys.
I expect it to go as soon as I post a thread for it for £60 :L
and almost died at
my colleges internet is down, i think gta 5 has taken over the internet hahaa, got dad to pick me up in the micra and had a quick rally home, i love my micra!!!
rat look micra, good street cred or because its a micra loads of hate?
I really enjoy that channel, tah for the link!
@IRNBROO - Should get a photo of the primerat up, people can see how its really done haha
Got my new painted spoiler back from the body shop. Looking forward to fitting it. Just need the bumpers back now and It'll look like a new car.
Looking for a new stock backbox, going to be good when I don't have to have the radio at 60% when driving everywhere.
Think most of the wool/packing has come out the back of it to be honest.
Think most of the wool/packing has come out the back of it to be honest.
Grille got its final coat of paint and the mesh put in place behind it, put it on tomorrow! finally haha
Ohhhhh ma god 5 inchHaha not yet no, got it for free big ass stainless steel 5" mofo im sure, need to double check actually :L
good shout though ill have a nosey
That's like supra size :O
'Sent from my bed using paper planes'
WDIDT ? tested the high comp corsa piston engine, the kart silencer welded to the bottom of the cat works ok eh
is that a frankspeed 4-2-1 I see? :L
EDIT Nevermind im going blind
Sounds good tho frank!
OP
OP
frank
Club Member
its one that i welded 2 pipes onto the outer primaries a while back MM, was a mission to do tbh
WDID? Not much boot is now being painted so should have it soon .
Going to take it on a dyno in a few months aswell for s**ts and giggles.
What do we reckon the 1.0l is putting out?
Frankspeed Manifold, Almera Airbox with K&N Panel filter, PLR full system
And probably gonna knocl the gubbings out of the first cat?
Thoughs on BHP output?
.Going to take it on a dyno in a few months aswell for s**ts and giggles.
What do we reckon the 1.0l is putting out?
Frankspeed Manifold, Almera Airbox with K&N Panel filter, PLR full system
And probably gonna knocl the gubbings out of the first cat?
Thoughs on BHP output?
Nah it'll be more than that
Wdidt?
Fitted a turbo or two
Pics or it didn't happen
h701micra
Deactivated Account
I hate you
Tis but part of my secret build
bare with me and I shall bare all soon and it doesn't run yet 
Enuo
Glorified Electrician
Forza doesn't countI hate you
Tis but part of my secret build
My car is finally complete again, only half a year with no grille hahaha
skymera
Brutal Honesty
I'll put my money on 58HP.WDID? Not much boot is now being painted so should have it soon
Going to take it on a dyno in a few months aswell for s**ts and giggles.
What do we reckon the 1.0l is putting out?
Frankspeed Manifold, Almera Airbox with K&N Panel filter, PLR full system
And probably gonna knocl the gubbings out of the first cat?
Thoughs on BHP output?
Good luck.
Haha, iv hopes of something in the 60's but we will see
.It worth knocking the crap outta the first cat? or that likely to mess up airflow?
skymera
Brutal Honesty
Only do it if you're good for an MOT or can be bothered swapping cats around.Haha, iv hopes of something in the 60's but we will see
It worth knocking the crap outta the first cat? or that likely to mess up airflow?
Much to gain performance wise though?
skymera
Brutal Honesty
every little helps
Great thing is everything iv bought for my 1.0l I can swap over to the 1.3 engine once I swap it
Watching with interest! How much shorter than a stock k11 spring are they Andy?
Sent from my HTC One S using Tapatalk 4
I thought they looked it, 2 springs from one then? I thought you'd found some secret squirrel way to uprate/lower suspension without choppies :/
Sent from my HTC One S using Tapatalk 4
Enuo
Glorified Electrician
Nooooo, but at £40 the pair, a damn site cheaper than buying a set of micra lowering springs if you're going for a corsa b lowering setup front and rear
Wdid?
Spent some time taking the engine I put in on Saturday out after the head gasket went on it yesterday! Not a happy bunny to say the least!
But I was happy when the post man brought me my 10" PE tubes for my kart wheels on the drift trike, so I went out skidding to make me happy again!
Suzie the Super S
Spent some time taking the engine I put in on Saturday out after the head gasket went on it yesterday! Not a happy bunny to say the least!
But I was happy when the post man brought me my 10" PE tubes for my kart wheels on the drift trike, so I went out skidding to make me happy again!
Suzie the Super S
OP
OP
frank
Club Member
not gonna fit another gasket motty ?
Nah, got a 70k engine on the way from a breaker up north with a 6 months guarantee
Not got the time or the know how to do a head gasket plus the crank seal flywheel side had gone too so the box had a fair amount of engine oil in too
Suzie the Super S
h701micra
Deactivated Account
Haha if only it was that simple eh. Click. Hear a buzz gun and some clicks. Job done
Nah i) mine are physically bolted on that's it
Need to put the engine together first
Your doggy needs more walky - and don't scratch that table ... your mum will kill you.
Your doggy needs more walky - and don't scratch that table ... your mum will kill you.
dad walks him miles but hes still fat hahah, and dont worry already gone through that pain of the wench moaning at me for scratching it -.-
