Enuo
Glorified Electrician
per cylinder4 valve whut
per cylinder4 valve whut
I want thisSpat my tea out everywhere thanks to Marks new idea for the Panda
per cylinder
She's lovely Davy
the cross member is rotten and bladdered hakim, but they are easy to change (as is the n/s headlamp panel that usually comes with the crossmember)Since I can not post pictures of the car here is the video. As you can see the front side is smashed.
?
What shall I do with the cross member? What about the area surrounding the broken headlight? is part of the cross member or what?
Regards
Edit:
After posting the video, I have removed the broken headlight and bar supporting the bumper. Couple of bang with hammer, and some pull and whack, the top of radiator panel, around the headlight and the bar connecting the bonnet lock mechanism looks a bit in shape.
Now the question is Do I need to replace the area around the headlights? or is it okay with couple of pull?
Regards
the cross member is rotten and bladdered hakim, but they are easy to change (as is the n/s headlamp panel that usually comes with the crossmember)
the hardest part will probably be the n/s chassis leg damage on the end
@ 2.07 min mate towards the bottomVery many thanks frank,
What damage are we talking about? I can't seen any damage on the passenger side chassis!
Have you looked on the 2nd video? (here is the 2nd video)
Can you please elaborate?
Regards
@ 2.07 min mate towards the bottom
Thanks a bunch frank,nah the front panel assy mate http://www.ebay.co.uk/itm/NISSAN-MI...arts_Vehicles_CarParts_SM&hash=item19d4afd2c0
and a crossmember/engine support bar from the scrappie
Oh I see,they,re both (confusingly) called cross member,s mate
the ebay link is a front panel assy mate (o/s and n/s headlamp panels, slam panel, lower crossmember and bonnet catch support)Oh I see,
So the link you provided has the cross member as well than. Correct?
Regards
Very many thanks frankthe ebay link is a front panel assy mate (o/s and n/s headlamp panels, slam panel, lower crossmember and bonnet catch support)
nah the front panel assy mate http://www.ebay.co.uk/itm/NISSAN-MI...arts_Vehicles_CarParts_SM&hash=item19d4afd2c0
and a crossmember/engine support bar from the scrappie
the bonnet catch is different on the facelifts, you will need to use your support bar (the bolted on upright in the middle) and i would leave the old o/s headlamp panel on personally.
Thanks frank,the bonnet catch is different on the facelifts, you will need to use your support bar (the bolted on upright in the middle) and i would leave the old o/s headlamp panel on personally.
has the chassis rail got a kink near the alternator pulley hakim ?
inside the engine bay mate, opposite the alternator pulley, and the lower crossmember is welded onThanks frank,
I thinks so, frank. @ 0.35 minutes on the video.
After posting the video, in the afternoon I did some more pulling, banging on passenger side headlight areas. It look a bet nicer now. I will post a video tomorrow.
Would it be any good if use a scrapy lower x-member? Just to keep budget a bit low!
Regards
On no. Inside the engine bay is quite okay. I will post a video tomorrow.inside the engine bay mate, opposite the alternator pulley, and the lower crossmember is welded on
Well thankyou Jen. Have to hold my hands up on the posting - me bad - got my daughter to do it.She's lovely Davy
Will take one tomorrowCan you get a daylight shot tomorrow? Would be easier to tell how it looks
Where's your bloody car - in the bedroom !!!!! You defo not married. If you were - you'd have lost more than a bit of skin.I think id prefer it in daylight jay... right now its scaring me
Wdid? Nearly broke my thumb off when i bashed the doorframe while carrying my engine downstairs, that being... Engine+flywheel+clutch+inlet mani+thermo+water pump all bolted together... The doorframe lost actually and i only lost some skin
Then got it to the garage and toook off the f/w, clutch and mani and turned it on its head to redo the sump gaskets, started late though so it'll be finished tomorrow and i'll hopefully start taking my engine out ready to swap bits and drop this one in
Also readjusted the panhard rod so everything lines up central now.
(ps. anyone know how much all that crap i carried actually weighs??)
Haha no... Not the WHOLE car just (at that point) 2 spare engines, full set of suspension, extra shocks, new clutch, exhaust back box, spare throttlebody, 2 spare sets of boot lifters, my old alloys(and tyres), spare toyo off my new alloys, spare set of arch liners and 2 spare wingmirrorsWhere's your bloody car - in the bedroom !!!!! You defo not married. If you were - you'd have lost more than a bit of skin.
I've even convinced my girlfriend that cars are fun!
I need his technique that's a great in its own rightWith a little help
Of course they don't come in - they can't bloody get in - can you ????Haha no... Not the WHOLE car just (at that point) 2 spare engines, full set of suspension, extra shocks, new clutch, exhaust back box, spare throttlebody, 2 spare sets of boot lifters, my old alloys(and tyres), spare toyo off my new alloys, spare set of arch liners and 2 spare wingmirrors
And no, definitely not married but my family dont seem to mind too much since they dont come in my room often I've even convinced my girlfriend that cars are fun!
Yeah there's a narrow path to my bed and pc Haha. Anyway there's one less engine now.Of course they don't come in - they can't bloody get in - can you ????
R-REG-SR written off by mercedes. is this the end? or just another begining ?
oh no!
not your fault? £1000 compensation
R-REG-SR written off by mercedes. is this the end? or just another begining ?
Real talk? This club would not be the same without you. You gotta love the REG.R-REG-SR written off by mercedes. is this the end? or just another begining ?
that may buff out
hehe lets see if it dont take a kilo of filler, worth a save
Yep, pretty surre that would buff out.
If not, plenty of super s' on gumtree recently - white ones :O!
Haha judging by their cars, I think it's more the first one. I had a tyre fitter ask me the same thing last week too, as soon as people see the back of it and the mid-spoiler they think it's a Starlet. I had to explain to them what a March was lolLol starlet? Are they blind or have you secretly supermodified it?
Wdid? Yesterday and today had a little play, too much time on my hands I think... and not enough money . So, I dismantled 3rd brake light and got creative with masking tape, a scalpel and some light tinting spray Anyway, have some pics.........
Fitted....
And lit......
R-REG-SR written off by mercedes. is this the end? or just another begining ?