• Please only use these forums for blogs, they are not a discussion forum

Thom-micra's custom

Thom-micra

Thom-micra

Hi all,

While i was on this forum, i thought, why not show my micra.
So here it is, a k11 5 door 1998 1.3.

My mods what i've did past 1,5 years:
  • FK corsa b coilover with custom pillowball topmounts
  • BBS rm025 7.5J
  • blacked headlights + grille
  • polo 6n splitter
  • Bride Artis III bucketseat
  • few small things
This is how it looks right now:
2igoq9t.jpg

nbwuhe.jpg

2uskd3b.jpg


My front suspention setup:
Old = left. New = right
It is a corsa b coilover, with custom pillowball topmount and stiffer D2 racing spring
2ns9wz4.jpg


I'm also waiting on a package from Japan, which contains OEM JDM rear lights and Nismo clutch

More update's will follow, i have a full list of things i want to do :D

Cheers
 
Thanks all!
I'm just started!
The wheels are on the car for like a month, but want other tyres with more stretch.
Then i want to make custom rear suspention, so it can be dropped more.

I'm also starting to build a high compression cg13 on bike carbs.
 
Haha, they need some more stretch to make the car drop low.
On the front i already have negative camber.

Today i also picked up a CG10 for my bike carb project.
I'm not just putting carbs on and drive, but i want to build it as good as possible.
So i'm going to take this engine apart voor the pistons, and clean everything.

23r03g6.jpg
 
Today came my parts from Japan home!
OEM rearlights
JDM Shiftknob
Nismo clutch kit

This is going to be a very nice weekend for me! :D
e6c1mo.jpg


aabuom.jpg


5y828j.jpg


Cheers!
 
Lights installed, needed some cable changes in the connector
but just as i installed them, i saw some orange on the top part of the lights. and that i noticed that the top red part, actually is just a red foil..
oi993l.jpg


And also the shiftknob installed.
pic of it + genuine bride artis III whitch is pretty rare here in holland :)
inevlc.jpg
 
Few days ago with mates rolla at dragmotion, dragrace event in holland.
free to drive with helmet and license
had some fun, and pulled an 1.8 corolla and 1.5vtec out :)

64i1e8.jpg


2yy60wp.jpg
 
well,
here i am again haha.
just had some plans changed, like the engine.
it isn't going to be an bike carb project anymore, but i'll swap the cg13 to a 150hp sr20de from a nissan primera GT
currently working on the engine, since it needed new main bearings.
11mewls.jpg


here the current status of my car, still a lot to do, but all plans for after the swap!
here it is on the dutch Dmpd event

jk86tv.jpg


2h5s02s.jpg


well, i'll keep u guys in touch!

Cheers
 
haha thanks :)
not yet, bbs are for sale now, and i'm looking for a daily k10 now.
when i have a new daily, the swap project will start, so update's will follow not far from now!
 
Here i am again!
lot of things done now.
Engine is completely rebuild with new main bearings and big-end bearings.
freshly painted and stuff
i35i1h.jpg


I also got a lot of new parts from japan.
-JDM spoiler with brakelight
-Grilles
-tomei shiftknob
-Nismo strut brace
-Nismo panhard
-Nismo front and rear stabilisator (new) :)
1rdcvo.jpg


For the swap i already have a few small things like Tomei fpr, Walbro fuel pump, brake cilinder almera GTI

And for braking i also have a few parts now.
German rear axle with disc, which gets S14 silvia brakes
and for the front i already have S14 4 pot calipers

Also going to make custom adjustable latheral arms.
Already made a design on Autocad:
qrdlwl.jpg


Now the car itself
i'm planning on making it a circuit car but still barely legal for the roads.
Because of that i'm going to make the car light as possible, which means some things have to come out.
One thing that is going to come out is the heater. Since i'm going use a 12v heater i dont need the original unit anymore.
I'm also going to use just 2 bucket seats, custom door panels and flocked dash.
246sv42.jpg


(ohyeah, i also got a Royal Grip suede steering wheel :) )
25zl2td.jpg


Also been hammering out the damping bullsht
343gold.jpg


Thats it for now!

Hope u enjoy reading haha.

merry christmas and a happy and marchy 2015!
 
This looks awesome! Can't wait to see it all put together :)

Out of interest, how much modifying will it take to fit the S14 brakes (new brackets? etc.)? Are you using different discs with the callipers? I'm always on the lookout for alternative brake setups to the common ones used and this looks interesting due to the potential of using S14 big brake kits :D
 
Last edited:
Calum said:
This looks awesome! Can't wait to see it all put together :)

Out of interest, how much modifying will it take to fit the S14 brakes (new brackets? etc.)? Are you using different discs with the callipers? I'm always on the lookout for alternative brake setups to the common ones used and this looks interesting due to the potential of using S14 big brake kits :D
Click to expand...

thanks :)

i dont know yet, i just bought the brakes and didnt look how it will fit haha.
i do know that i'm going to use 280x30 discs wich are going to be turned down to 275 because it then will fit 15".
 
Thom-micra said:
thanks :)

i dont know yet, i just bought the brakes and didnt look how it will fit haha.
i do know that i'm going to use 280x30 discs wich are going to be turned down to 275 because it then will fit 15".
Click to expand...

I saw some nice 330mm Wilwoods for a Pulsar the other day, would look insane on a k11.. Would need pretty big wheels though (18" ??) Maybe I'll do it when I fit a widearch kit one day :rolleyes: Looking forward to seeing how you get the brakes to fit :)
 

Similar threads

K
newbie with cg13de real tuning.
Replies
48
Views
12K
frank
frank
euro_micra
My facelift K11
5 6 7
Replies
329
Views
88K
Bjwilletts
B
V
1998 Micra SR
Replies
33
Views
6K
Valman
V
Back
Top