Taking offers

[Stani1029]

1.off car adjustable panhard rod, without metal insert on drivers side (in picture)

2.decat pipe

3.super-s/sr front bumper w/o lights in red

4.brand new unused genuine piston rings (no pictures)
5.set of 4 tsw 14" alloys with 2 r888 tyres (could do with respray but clean up well)

6.york exercise bike?? still like new

 

[Stani1029]

7. Insane badges SOLD

8. 20mm wheel spacers x4 (extended studs required)
9. 5mm wheel spacers x4 (extended studs not required)

10. Aj4 wing mirrors (pictured above on car)
11. Lowering springs (pictured above) had a coil cut off and supposedly lowers by 60mm

 

[Daniel]

Where did you get the Insane badge from? I want one so badly, but got less than no money at the moment . Was it custom made or something?

 

[weestar84]

oooooooooooooooh can i have the insane badge pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeee how much?? think it rather suits me lol

 

[frank]

Where did you get the Insane badge from? I want one so badly, but got less than no money at the moment . Was it custom made or something?

i may have slipped in a prior pm :wasntme:

 

[weestar84]

awkkkkkkkkkkkk frank grrrrrr ive just sent a pm too lmao

 

[Daniel]

i may have slipped in a prior pm :wasntme:

Damn it Frank :laugh:. I can't afford to get anything for my car at the moment, due to a lack of employment. Just trying to find out the best place to get bits like this from for when I can actually afford it :doh:

 

[gtsnissanb]

You can get them quite easily on ebay

 

[weestar84]

theres only 1 on ebay

 

[weestar84]

come on stani put us out out misery whos getting the badges lmao

 

[legendryan]

For the panhard rod, what does 'without metal insert on drivers side' mean. Would I need to fix this or something?

 

[gtsnissanb]

theres only 1 on ebay

Used to be loads

 

[weestar84]

only 1 like stani's the rest are black stickers :S unless im looking for the wrong thing LOL

 

[azab9989]

how much for the super s bumper?

 

[Stani1029]

For the panhard rod, what does 'without metal insert on drivers side' mean. Would I need to fix this or something?

Its the insert that sits inside the yellow bush. They tend to seize on car and its obviously happened on this one. People need to use copper grease!

 

[Daniel]

People need to use copper grease!

Copper grease for the win (Y)

 

[frank]

come on stani put us out out misery whos getting the badges lmao

i,ve been outbid

 

[gtsnissanb]

Its the insert that sits inside the yellow bush. They tend to seize on car and its obviously happened on this one. People need to use copper grease!

I find Ky jelly stops my insert getting stuck in the bush


Wee your right only one, there used to be hundreds must have shut down the china manufacturing plant lol

 

[weestar84]

I find Ky jelly stops my insert getting stuck in the bush

sorry but that just sounds soooooo funny LMAO :laugh::laugh:






*goes and hides in the corner now*:wasntme:

 

[gtsnissanb]

sorry but that just sounds soooooo funny LMAO :laugh::laugh:






*goes and hides in the corner now*:wasntme:

Disgraceful tut tut





Yeah that's what ment lol

 

[Daniel]

I find Ky jelly stops my insert getting stuck in the bush

PAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

Innuendo overload?

 

[weestar84]

i,ve been outbid

sowwy frank my bad

 

[foxto]

How much for the wheels delivered to sheffield mate. They are just what im after!!

 

[peposhi]

On the thread :grinning:
Stani, could you, please, let me know about the price incl p&p for the super s bumper? A friend from Bulgaria has asked me to find one for him... And is it hard to get the fogs for this bumper?

 

[Stani1029]

Wheels are about £50 for delivery, pm me an offer

Pepo you want a price to bulgaria? Or ireland?? Fogs wont fit the bumper as there are no mounting brackets

 

[K11 Gazza]

How much you looking for the Panhard Rod and Wheels posted mate?

 

[peposhi]

The delivery would be actually to UK. A friend of mine lives there and I could ask him to send it via Bulgarian courier(they charge a pound per kilo or something... Very reasonable.
So if he decides to go for the bumper, he needs to find fogs with brackets, is that right?
I'll let you know as soon as he gets back to me.

Tha

 

[Stani1029]

No the brackets come moulded into the bumper, he would have to make up a braket to fit them

 

[peposhi]

OK, PM me how much you'd want for it and I'd say by Fri I'll know if he wants it or no. Thanks again(Y)

 

[oranje]

pm sent

 

[peposhi]

Hi, Stani
I spoke to the lad from Bulgaria. He's going to look for the one with the fogs. So, no need to send/check prices and etc.

Thanks anyway and good luck with the sale!

 

[Stani1029]

It was £20 for delivery if he changes his mind bumper comes with correct brackets that bolt onto the front panel too

 

[Stani1029]

More added

 

[foxto]

Are the springs for sale mate ?

 

[k11_whore]

Wheels still available and how much posted to northern ireland, belfast bt5 4dn

 

[Stani1029]

Spring are available

Wheels are sold!

 

[peposhi]

Stani, what drop are the springs? FH-5 of here was looking for 60mm...

 

[FH-5]

Stani, what drop are the springs? FH-5 of here was looking for 60mm...

Thank you so much peposhi! I desperately need 60mm springs. As peposhi said, what drop are the springs Stani? Thanks :grinning:

 

[Shaun]

Thank you so much peposhi! I desperately need 60mm springs. As peposhi said, what drop are the springs Stani? Thanks :grinning:

11. Lowering springs (pictured above) had a coil cut off and supposedly lowers by 60mm

Yes?

 

[FH-5]

Thanks mate, that is a no no for me - cut springs. Unnecessary risk and reduces performance of springs by cutting them. Thanks anyway.

 

[frank]

cut springs. Unnecessary risk and reduces performance of springs by cutting them. .

have you not seen a spring making machine FH ? they load a big reel of spring steel onto the machine and it forms the spring, then when it reaches the required length the machine automatically cuts it off , then it starts another spring

 

[Daniel]

have you not seen a spring making machine FH ? they load a big reel of spring steel onto the machine and it forms the spring, then when it reaches the required length the machine automatically cuts it off , then it starts another spring

I must say Frank, I myself had never looked at it like that before fwn

 

[Guy]

If I can run the insane badge design up in Coreldraw, it wouldn't cost the earth to get a local place with a laser CAD cutter to run a load up surely from a sheet of stainless plate?

 

[FH-5]

have you not seen a spring making machine FH ? they load a big reel of spring steel onto the machine and it forms the spring, then when it reaches the required length the machine automatically cuts it off , then it starts another spring

Ok Frank, can you provide me a link so my heart is at rest so that i can buy them?

 

[frank]

Ok Frank, can you provide me a link so my heart is at rest so that i can buy them?

car springs are probably hot rolled from set length rods, partly because of their size, but the springs in your seatbelt and other safety devices will have been spun from a reel of wire (youtube ?)

 

[FH-5]

car springs are probably hot rolled from set length rods, partly because of their size, but the springs in your seatbelt and other safety devices will have been spun from a reel of wire (youtube ?)

This link shows otherwise Frank, please watch and advise me further: http://www.youtube.com/watch?v=_jfAJlB03jw
:grinning:

 

[frank]

This link shows otherwise Frank, please watch and advise me further: http://www.youtube.com/watch?v=_jfAJlB03jw
:grinning:

yeh, they,re hot rolling them from a set length rod (like i said :grinning

 

[FH-5]

yeh, they,re hot rolling them from a set length rod (like i said :grinning

Ok, but still from the video it is modified in some way, i.e. it is not just simply cut from a longer length of rod, it is formed, coiled, probably set to correct tension etc, so i doubt suspension springs cut by anyone after they are formed is the same strength as one that is un-cut and to it's original drop rating.

 

[frank]

Ok, but still from the video it is modified in some way, i.e. it is not just simply cut from a longer length of rod, it is formed, coiled, probably set to correct tension etc, so i doubt suspension springs cut by anyone after they are formed is the same strength as one that is un-cut and to it's original drop rating.

the other processes in that vid is where it "barrels" the ends eh
incidently, i changed my boss,s rear springs on his BM estate today because one of them was broken, and going by the rust on the break it had been broken for months (broken car springs are replaced every day eh)

 

[Daniel]

the other processes in that vid is where it "barrels" the ends eh
incidently, i changed my boss,s rear springs on his BM estate today because one of them was broken, and going by the rust on the break it had been broken for months (broken car springs are replaced every day eh)

My mum had this same problem on her BMW Z4 - took it in to get discs and pads all round, only to find the springs on all the struts where snapped in half. And, same as with your bosses car, the rust showed that they had been broken for a while. No wonder the ride was so ####e, along with 21" alloys with low profile tyres :laugh:. That was an expensive day :glare: