• Please only use these forums for blogs, they are not a discussion forum

Porks supercharged k11 project

pork

pork

Club Member
Had a couple of k10's in the past, great fun, but thought I'd give a k11 a go this time :)

Picked up this beauty.....

e353947ebc480d3240b33548c3200d37.jpg

edc73f213ffeba594020a8850603104c.jpg

8815ec18119cdf8dc1e16943123c77b3.jpg



......auto (which il convert) £100 with years mot

Plan is to use stuff from old k10 that's lying about

Starlet mani with top feed 330cc Audi injectors

7d7d12d442b4e49f37ff58f25ce301a3.jpg



Polo coillies

7ed5a453c2f85cd88493077cdf9b7672.jpg



Swirl pot pump and filter stuff

e11625815cd5e798ee38a676197eadc1.jpg



Home made stainless 4-1 mani

0fdac330d0e6a9551d4f8a4d17f02a6a.jpg


Cg13de with m24 supercharger, hybrid cg10/13 clutch I made to go on a cg10 gearbox

720510ce3a5b606a3771e4d029868268.jpg

76e43ef634ee08d36ac1b21e635016b6.jpg



Supercharger mani/bracket

5fcbcdff9d394db8f1471d6ec1440f8f.jpg



Sent from my iPhone using Tapatalk
 
After a cg10 pre face lift gearbox

Manual pedals and gear lever stuff too


Sent from my iPhone using Tapatalk
 
Where are you pork? I have a cg10 here (south coast between portsmouth and Brighton) that's ripe for cannibalising.
 
I live in thrapston but work mainly in luton

But could possibly drive :)


Sent from my iPhone using Tapatalk
 
Might pick up some starmags tomorrow on the cheap ;)

Does rangerbob on RR still do the bolt on arches?


Also, the engine on this car is shagged, no compression

It's a cg10 auto, so will it be closed deck like the cg13 autos?

Havnt had chance to rip it apart.

If it is, I might give a low comp engine build a go with the corsa 1.4 twinport pistons and cga crank

I think I remember that being right, if not correct me :)


Sent from my iPhone using Tapatalk
 
I've not heard bob's arches mentioned for a while, but I'm sure a quick google for the thread and PM to him would find out.
 
Last time I ordered a set was 3-4 years ago for my first car

e1375a15200bd376061162bfbcc8a7b2.jpg



Anyone else do then?


Sent from my iPhone using Tapatalk
 
Cg10 pre facelift box

Manual pedals and gear lever stuff

Any of those if you have it mate?


Sent from my iPhone using Tapatalk
 
Just browsing for gear lever stuff, are the all the same between the models/year, my cars a 1993


Sent from my iPhone using Tapatalk
 
Started taking off old engine and auto box......man there's a lot of plugs!

But snug in the bay compared to the k10!


Sent from my iPhone using Tapatalk
 
Bit of an update....


What an absolute chore that was to get out!!

56384a841a6a5136d1df9e165d3b2c57.jpg


Just needs a tidy for my engine to go in

6d07b72aa67293f1fee85ebc96d17f0f.jpg


Auto shifter out

d472ab7067d1ac9b1e5b43834b3ba00d.jpg


Coilovers modded to fit


ed06afb2a8fcb55e90342f4bc7155b01.jpg

4cb17b08c9dda520b4e45afc63c9a269.jpg

6eeb536875c1e4dccd0f8b58075b172a.jpg


Sprayed up with some nice black along with supercharger throttle mounts

82b2f3336221ac0bf18b236e68e2ae9d.jpg



Sent from my iPhone using Tapatalk
 
Cheers

Should be picking up a cg10 box once scrappy gets of his arse!!

Are the auto drives shafts the same as manual?


If not ok get those at same time


Sent from my iPhone using Tapatalk
 
Nah, want the cg10,

Want the acceleration. Lol

Otherwise il need new clutch flywheel and shafts too


Sent from my iPhone using Tapatalk
 
Not overly bothered about top end, it'll only be used for blasting around b-roads and maybe the odd small track lol


Sent from my iPhone using Tapatalk
 
Had an hour free.

The wishbones were rusted to hell, but luckily had mine from the old car

So swapped those over along with hubs/brakes as mine were in better state

Popped in front coilovers too lol

35e089a7f6c7fd893fcc4b9c9df17de6.jpg


Got a gear linkage from eBay, it's only got 2 mounting holes on the back, but nowhere to mouth on the front??

An I missing something

abf966e6bb46c3a70a9be78869fb9e5e.jpg

ab64fd465e87dcd7baf34bfa6a92fd63.jpg



Sent from my iPhone using Tapatalk
 
Also, never taking there cars apart

Are the back springs easy to tenivr


Sent from my iPhone using Tapatalk
 
Rear coilles on....

8d970d8a3fe55e580c238654642611c4.jpg


4b4021553e09ed7b404988d1fe8d4162.jpg


8939a5098f54645a4243f1ea2765c65a.jpg


Pretty much as low as it will go, bare in mind there's no engine in

It won't stay like this, just to see what it looks like lol





Sent from my iPhone using Tapatalk
 
Got the nuts off, but bolts won't budge

Been smacking it for ages lol


Sent from my iPhone using Tapatalk
 
The top one is the only bolt that is removable the lower is a stud :)

Try putting the rear up on stands then raise the axle so the weight is taken off the panhard
 
Panhard rod : A blow torch + mole grips + angle grinder + swearing = usually more swearing but eventually it'll come off.

Chances are the metal sleeve that's in the lower bush (maybe also the upper if you're having trouble getting it out) will have rusted itself stuck. Just carefully remove the lower one so you don't damage the threads.
 
I've got all nuts of ok, the top bolt is completely seized together.

Tried all sorts of breaker bars, mallets, colourful language


Sent from my iPhone using Tapatalk
 
Yeah i know i had to cut and grind the bolt flush with the upper mounts and slowly prise them apart to get the rod out. I was swapping everything out though so i wasn't too fussed with how i got it out :D

I can say nearly 100% the lower sleeve with be rusted solid but once you've got the upper out you can pull off the panhard and them remove the bush and finally see wheren to start working on the metal sleeve.

Can't even remember how long it took but it was in the hours...probable took longer as it was one of the first things i started modifying and I was being gentle haha.
 
Gunna be fitting my standalone ecu and loom this week,

So no need for old stuff,

How much of it can I remove? I don't need any of the engine control stuff, but what else is connected to iy?

Fan? Other car equipment?


Sent from my iPhone using Tapatalk
 
pork said:
Gunna be fitting my standalone ecu and loom this week,

So no need for old stuff,

How much of it can I remove? I don't need any of the engine control stuff, but what else is connected to iy?

Fan? Other car equipment?


Sent from my iPhone using Tapatalk
Click to expand...

You can bin quite a lot mate, but I kept the fan etc in just so I could piggy back into the wiring.

I've a few wiring diagrams I can email you if that's any help?
 
Found this whilst messing about with wiring

b529a762bbe50222db33a92aaef26061.jpg



Mounted my 'brain' box
85be393bd8de0524f84f8fba836d1e3b.jpg


02eee3b4fd77d67a8f7432c47285c8ac.jpg


08d6060b7331ed4f64caf9530f5f8d00.jpg

4ec65a663fe4c7f99081237c1daec37a.jpg



Sent from my iPhone using Tapatalk
 
It's got allot of stuff in it lol

Fuses,relays, ecu gauges, innovative stuff

The idea is if I ruin the car, or go back to a k10, just unbolt and bolt in new car without having to require the whole car

The cars a toy, so looks ain't a problem


Sent from my iPhone using Tapatalk
 
Manual pedals in....

Drill this out

9ccf46e29440313a627fa680f7ed8b10.jpg


Bolt on pedals.........chore!!

27c1b315259f4ac4c4081a1284eabceb.jpg







Sent from my iPhone using Tapatalk
 
4d393c301dfe7908a5298cc1d330508a.jpg



Got my gbox mounts and shafts

The automatic cable speedo drive is too big for this manual box

Dam it


Sent from my iPhone using Tapatalk
 

Similar threads

Kiza1208
My Shicra build project
2
Replies
82
Views
8K
davyboy
davyboy
darrenc1995
My 97 K11 Micra GX
2
Replies
84
Views
7K
SirChris
SirChris
superls
SuperLS's K11 1.3 SR Blog
Replies
46
Views
8K
superls
superls
VitzJoe
Vitz (It's really a Yaris) project
Replies
24
Views
3K
VitzJoe
VitzJoe
skymera
Skymera's Blue K11
Replies
7
Views
2K
SirChris
SirChris
Back
Top