K11 Piper Cams.

[Ed]

K11 race developed Piper cams.

There are two types available:

Fast road 248 deg in/out 8.77mm lift in 8.72mm lift out +8bhp (on stock engine)
Ultimate road 272 deg in/out 9.07mm lift in 9.02mm lift out +12bhp (on stock engine)

These are regrinds and are 232.65 Inc vat on an EXCHANGE basis (I will need your old cams + they must be in good condition)

To use these you will also need a shim set @ £51.70 These will need to be machined down to the correct clearences for your engine.

Contact me for more info.

 

[Dusk]

how much would it be to machine the shims?

 

[Ed]

That totally depends on the machine shop you have to get these done. I would guess somewhere between £50-100. I have made some enquiries and my local machine shop reckons its about a 4 hour job and worse case would be about £100

 

[Mark]

can you get re-profiled K10 cams ed? if so how much for?

 

[NeX]

Are there any problems with running these on a forced induction setup?

 

[Alienfish360]

Do these need to be re-profiled from CG13 Cams or can your re-grind them from a CG10 cam?


Are you still doing £260 for the full lot?

 

[Ed]

No, not enough interest to make the offer of 260 worth while.

 

[skymera]

Not meaning to bump an old thread, but Ed do you still do these cams and shims?

 

[lionodub]

K11 race developed Piper cams.

There are two types available:

Fast road 248 deg in/out 8.77mm lift in 8.72mm lift out +8bhp (on stock engine)
Ultimate road 272 deg in/out 9.07mm lift in 9.02mm lift out +12bhp (on stock engine)

These are regrinds and are 232.65 Inc vat on an EXCHANGE basis (I will need your old cams + they must be in good condition)

To use these you will also need a shim set @ £51.70 These will need to be machined down to the correct clearences for your engine.

Contact me for more info.

any1 know if any of these are compatible with k11 1.4s 2001 model?

 

[karlj]

Holy thread revival

 

[lionodub]

Holy thread revival

hahaha i know but i've been looking. main difference between cg13de and cga3de.Can the Ultimate road cams fit in a cga3de? that would be awsome!

 

[karlj]

You need to send your cams for reprofiling

 

[Naz-b23]

Hi ed do u still offer this service forbthe cams aswell as thr shims