Won't forget those - did I tell you the money went through ok?
I have a set of ST ront brakes and K11 rears up for grabs...
Im from pompey, so might be a good chance for me to meet you guys.
ST uses 100NX 1.6 disks
ooh, well craig i am after your splitter as you well know
i got red sunny 2.0 brakes that need new seals and brand new vented disks for them. i got odd bits like a starter motor and boot handle, odds and ends i will bring it all we can open the boots and have a car boot sale
Would the 2.0 sunny discs fit with 1.6 100NX calipers? I've got the calipers and pads and some used discs, I just want some new ones!
Edit: Doh just checked, too big
Haha, that is not coming!
(unless I get some carnuba wax real quick...)
Pete, not sure what condition the disks are in, they're plenty think enough, not that expensive to get them re-skimmed is it/
I have a few bits and pieces.
One in particular is an Ashley performance backbox for a K11. Cost me £120 not long ago and has been removed for a while (new car). It's a bit rusty on the bottom but this can't be seen when on the car anyway!
I need rid of it, so £20 and its yours
i will take it swap it for some brand new vented disks?
Yep I'd be interested. Vented discs for what model car though?
Pair of pre-facelift wings?
Haha, try and bend me over a barrel eh?
as far as i know they are gtir ones. they fit the hubs of a k11, so i suppose its down to finding a caliper that will fit over them. i will be bringing them anyway so you can take a look
sorry craig is that a spitter you have for sale?? lol
Doh, not for me then! Can still have the backbox for £20 though
I'm after some vented 100nx/sunny/almera discs to go with some calipers I have.
What is a right side foot guard?
the panel next tot he drivers right foot next to the throttle that covers all the wires
well they may still fit, i think they are the same size. have you got the calipers? because i can bring along a hub and we can put the disk on it and bolt on the caliper and if it all fits then they are all good
the panel next tot he drivers right foot next to the throttle that covers all the wires
No I've just checked and they are about 1cm bigger in diameter, and 4mm thicker! I'll just be going for 1.6 vented discs, dont need any more than that.
Doh. Well, you could always measure them . I'd be interested if they were the right size!
They might just work then....100NX discs are 240mm wide and 18mm thick. I guess that makes it a deal!
the panel next tot he drivers right foot next to the throttle that covers all the wires
Ahh, the wierd shaped piece that is held in with a screw and a plasticcy thing?
I'll have a look in my box of trim...
nex, how much?
really dont have a clue but i wasnt thinking much lol
what do other people think??????
hehe sounds good to me thanks nex dont suppose you got a brake reserve cap lying round for a burger with those chips? lol