New profile posts

Anybody know why my stereo isnt working or turning on checked all the wires cant find any loose or untached anyone have anymore ideas on what to try?
S
St0rm91
Check the fuses. Bottom right of steering wheel is a little hatch that covers the fuses and the diagram is on the pull off cover. You should easily be able to see if the corresponding fuse has blow by looking at it under a light.
.Maarten
.Maarten
Check all the fuses and check the earth. A Micra doesnt have a earth in the wiring so you have to make your own if a previous owner didnt do this.
Hi Ed, you seem to be the man to ask.
I am swapping out the 1L manual from my trike and fitting a 1.3 auto, both K11 engines so fitting isn’t an issue.
It’s the dreaded NATS that’s causing me a pain. The engine I am fitting is from a 97 micra with the red chip keys, is there a way round it or am I up a creak? The car is still a runner as I am trying to sort it before fitting.
Thanks, Nigel.
Do you still have your k13 dig-s. I have a nodded one as well. Is there a cold air intakenthay can be fitted as I've been advised I can't do it
Hi can someone help me I'm after a radio code for my nissan micra 57 plate the serial number is pp3001mb0005906. Thank you!
Not sure where k10 one is ,k11 is on inner wing offside, i once opened it up to clean the contacts and made work again ,saved £27 .
Can somebody please help me with my radio code :( details:
BP334947338534
7643349318
Please help me!
I need of the radio unlock code for my micra

The details are:
BP538761129240
Nisan no: 7645387318
024199
Thanks!
I signed up today to try and help my daughter who bought her own first car (2004 Micra SE) at 19 two years ago with a very low mileage of 26000 and a log book to prove it. She spend another £400 the past two years to keep it running safely. Three weeks ago the dreaded red PS light came on and after being taken to an inappropriate garage that could not do any diagnostic work we are back on the drive. Please help.
alrite frank thinking of doing a engine swap in my 1994 super s . not sure which engine to do . sr20et or b16 or k20 could you give me any advice of which would be best? thanks alot
frank
frank
i never tried an engine swap mate, more into diesels nowadays tbh
Hi, My Dads having problems with his ps. Its just heavy to turn and seams to stick a bit in the straight ahead position most noticeably on the motorway where its hard to keep in a straight line. I disconnected the uj and it still felt stiff and sticking. I've took the column out but can find nothing obvious at fault. I wondered if you would be willing to have a look at it for us. Thanks Steve
H
huttojb
Where are you located? But yes if your near to Birmingham.
Hello,
I too have a ps problem on my Nissan k12 , you are probably sick of people asking you BUT could you please point me in the direction of what to do to get this sorted, i am relatively happy using a spanner/screwdriver and Based in Pembrokeshire,
H
huttojb
If I can help I will. What reg year is the vehicle.
Can anyone tell me how to get the wait 1 hour off my radio please I entered the wrong code and now I can’t get back to enter the right code
My dad's family come from that neck of the woods, I must do a road trip out that way soon. Me and Mrs Tornado spent a night in Galway city a year ago, that was good.
Hi my mother has a Nissan Micra 57 plate & has just had a battery replaced, comes up with code for the radio??, can anyone help please
hei frank, for a quick question, does a pre facelift 1.3 clutch assembly fit an early non pre facelift 1.0 flywheel? manufacturing year is 1994, but i measured the clutch 160mm? werent non pre facelifts supposed to be 180mm? this is wierd. hoping for a quick reply since im leaving soon to buy a new assembly lol.
frank
frank
the p/fl 1.0 is the only 160mm one mate
hello ,i have problem with code ,it is lost ,my car is nissan micra k12 BP234631993477,,please help me
Hi Frank, I have a post on the k11 general discussion forum in regards to my k11 cvt gearbox issue, however it hasn’t been moderated yet. Any chance that could be done. Could really do with the advice from guys that have good knowledge of micras :) cheers
frank
frank
hi cameron, the mods are pretty quiet on here nowadays
F
FLORI
hello
i am flori i have nissan micra year 2003 k12
BP234631993477
my email is [email protected]
Hello i am ok for your price concerning sc and ic have you a paypal account tell me how much to send to france
Thks
Manu scolan
What is your contact if you are interested in SC and IC etc. I will sell to you for 220 Euro. Not sure what clamps and joiners I have as I had to use some of them. Will include what I have. There is an alloy intake pipe that goes to the manifold and a brand new boost gauge I will throw in. Shop around before you decide.
I am a 16 year old guy with a 16 year old Century Green Micra K11 1.0 'Mikey' from Norfolk, UK.
Hi frank ive just been reading your guide to ignition timming on the micra 1.0 i now understand that it needs to be on the 2nd to last white notch . (2nd closest to me stood at front? ) but do i have to set my timing strobe on 15.0 advance or 0.0 (its a digital one )

Thanks tom
Hey bro. Im loving the way u modified ure car.. I just bought a black one like urz and i already have a few ideas for my lil project, but i wanted to ask u about the kit. It is very difficult for me get these parts here in seychelles and i was wondering if u can help me out with a supplier that can ship here. And also, the fog light in ure bumper, is that custom made? It looks hella dope.
Back
Top