Wheel Fitting Help

[Mike77]

Picking up a set of Almera GTI alloys tomorow for my K11, just checking that I can use my standard wheel bolts (and a locking nut set) or will I need extended bolts. Not used to all this Jap stuff as I used to have a clio 1.8 16v so am in French mode!

Thanks in advance :blues:

Mike

 

[tiny big]

I have a set of 15 inch genuine nissan alloys which I believe are off the almera on my k11 they fitted with standard nuts correctly and with no clearance problems-jon

 

[Alexx117]

Yeah direct fit - just watch out for the tyre profile mine scrubbed with 55's

 

[Simonh]

no you cant use standard wheel bolts if you have steels on....you need alloy wheel nuts....and then put your locking ones on.

 

[Mike77]

Arse, I do have steelies on there at the moment so i'd need new wheel bolts then :down:

They have 55's profiles on them at the moment, surely it wont scrub at standard height its like a 4x4! :laugh:

Miogh end up selling them then if it's going to be too much messing about only wanted a cheap set of wheels

 

[Mike77]

Have decided to sell these now as cant be arsed to mess about with them. £60 collected from Essex if anyone is intrested email [email protected]