what did you do to your micra today ?
- Thread starter frank
- Start date
Hello again nath. I'll take your advice and wiggle a few wires, had the battery disconnected when I took the head off.
Yes .... I'm fine as well ... cheers bud.
SuperUno
Buy & Sell Member
That's a lot of work to go for a drive, I just jump in and go ??
True, and this is quite a short pre event list.
Left the handbrake cables for another day. For when my exhaust needs replacing because it's snapped, that day. At least the hand brake actually locks up now! Also took a photograph of my office..
Sent from my iPhone using Tapatalk
That looks very, very neat.
Damn you... Done any more events with the 1.3?
That's a lot of work to go for a drive, I just jump in and go ??
Haha so do I.... Been ok so far
Thank you! And nope, can't decide yet. Maybe Caerwent or Talbenny Stages in March/April. A road rally also needs to be scheduled
Sent from my iPhone using Tapatalk
saturday tested the car and made it go to red light, was curious what the red light looks like and its a scary exerience haha, then today went to bristol meet, dont like avonmeads speedbumps at all... apparently the green beast got alot of attention and a few pictures, must be the granny porn petrol cap!
SuperUno
Buy & Sell Member
PPP = PPP ..............Haha so do I.... Been ok so far
Prior preparation prevents piss poor performance?
Whats that one stand for?
h701micra
Deactivated Account
Proper Preventative Maintenance Prevents Constant F'ing About
Enuo
Glorified Electrician
Removed the idler pulley, PAS pump, AC pump and water pump from the engine. Fitted the shorter belt but the tensioner on the alternator side is on the idler pulley. Doh! Will source or make an adjustable alternator bracket.
Removed impellor from the water pump and modified:
View attachment 28451
No welding required, a 30mm core plug will fit perfectly in the bearing seat to make the unit watertight again
Making progress
Removed impellor from the water pump and modified:
View attachment 28451
No welding required, a 30mm core plug will fit perfectly in the bearing seat to make the unit watertight again
Making progress
Attachments
Last edited:
Enuo
Glorified Electrician
FixedGood news
It'll be in next month
h701micra
Deactivated Account
Still not badFixed
Magpie42
Actual Magpie.
Did you spray them on the car and tape up everything?
h701micra
Deactivated Account
Why not eh
Enuo
Glorified Electrician
Dunno yet, they're making a mandrel to hold it. A lot though
Edit: off the back am having about 1mm thick left on the band behind the gear ring, and there's about 15mm or so!
Had a fiddle with the speedo head, got it working, then not working, and so on. Looks like I need to jam a bit of wood or something in between the scart holder and outer cover, seems to be a bit loose.
Fitted my blue lcd's while I had it out. That's in preparation for my attempt at changing the colour of my speedo face - should be fun.
Also, ordered a cone filter from Amazon, it had rave reviews, so, I thought - why not, £8 all in, so no loss if its not up to scratch.
Fitted my blue lcd's while I had it out. That's in preparation for my attempt at changing the colour of my speedo face - should be fun.
Also, ordered a cone filter from Amazon, it had rave reviews, so, I thought - why not, £8 all in, so no loss if its not up to scratch.
Changed the oil and filter in mine
Has anyone got a lowered suspension set up for sale?
Stripped the speedo head down, looks like circuit break or sumfink, squeeze the two parts together and it works ! have to have a look again, also, the speedo needle appears to be jammed, can you oil these things ? I can move it, but a bit tight compared to the other needles. How do you take the needles of the fascia, had a bit of a pull on them - but - they aren't moving
I've ordered another just in case.
I've ordered another just in case.
Magpie42
Actual Magpie.
No-one's lowering anymore....it's all about the "completely stock" look....
Coincidentally, I have a full set of stock springs for sale.....
Get them for achieving things like 1000 posts etc. I should have one for visiting the motorsprt section but aint got it yet
Ah, I see it now, 1001 posts, that's bad - must get out more.
h701micra
Deactivated Account
Turbo time
Magpie42
Actual Magpie.
h701micra
Deactivated Account
Got a leak? :/ripped the carpet out again as its soaking wet :/ and refitted the radio for saturdays trip
Belly93
to turbo or new lump :/ hmmm
i hAS a hole in the end of the sill i think its getting in there and running along under the carpet
h701micra
Deactivated Account
Odd :/
Tried the news paper trick yet?
Belly93
to turbo or new lump :/ hmmm
nooo?
h701micra
Deactivated Account
Well you should.
Tape small pieces of paper to wherever you think could be leaking and you'll soon find out
Don't put one big sheet in as it'll just soak it all up
Belly93
to turbo or new lump :/ hmmm
its only in the drfivers side rear no holes in the floor soundproofing behind dash and pedals is dry only other place i can think of is that wholeWell you should.
Tape small pieces of paper to wherever you think could be leaking and you'll soon find out
Don't put one big sheet in as it'll just soak it all up
Loving the coke can
Magpie42
Actual Magpie.
Nah, if it was ghetto, it'd be special brew...
Sent from my RM-892_eu_euro1_205 using Tapatalk
