Well I let Ed loose on my car. And the results are.. (in a video, inside this thread)

Davey C

Ex. Club Member
Club Member
Its been a while and I now have all my new parts fitted, anyway here are the pics and result, oh and the video.

As always, comments, youtube "favorite'ing", "subscribing", facebook "adding", Twitter "Following" and and other social media buzzwords welcome


Well its a bit of a different post this one, I took my car down to Fusion Motorsport to swap a couple of parts and get the car KPro'd (ECU Remap). First one was the insane noise produced by the BuddyClub ProSpec, I do love it but its too much for me so I'd managed to get my hands on a second hand Mugen Twinloop system and i'm going to give that a go. Next up was to swap the inlet manifold for an RBC.

Well anyway I made a video about the results and i'd love to hear your thoughts. :)

Fusion Sponsored the video so if you enjoy the video please support them.

14106_110421855656138_100000649716816_124178_1778242_n.jpg


First up, Base power run

Modifications at this stage are:

Stock Intake
Stock Inlet Manifold
Stock Engine
DC Sports Exhaust Manifold
BuddyClub ProSpec, Cat-back

14106_110421842322806_100000649716816_124175_3298694_n.jpg


The dyno we were using was Surrey Rolling Road, its literally over the road from Fusion and also its a proven consistent dyno, important for the testing we planned

14106_110421922322798_100000649716816_124192_3029226_n.jpg


14106_110421848989472_100000649716816_124176_5089107_n.jpg


We managed 214hp on the first run

14106_110421868989470_100000649716816_124181_5779185_n.jpg


14106_110421932322797_100000649716816_124194_143334_n.jpg


We went back to the workshop and removed the BuddyClub exhaust

14106_110421828989474_100000649716816_124172_309720_n.jpg


14106_110421832322807_100000649716816_124173_7578975_n.jpg


14106_110421838989473_100000649716816_124174_2565232_n.jpg


We swapped this with the Mugen Twinloop

14106_110421895656134_100000649716816_124186_3265580_n.jpg


14106_110421898989467_100000649716816_124187_720265_n.jpg


14106_110421862322804_100000649716816_124179_6751911_n.jpg


We did another powerrun after this and managed only 207hp, a drop of 7hp

So after this we took the car back to the workshop and fitted a new inlet manifold. The RBC, i'd read good things so I was expecting a lot.

14106_110421872322803_100000649716816_124182_4562263_n.jpg


14106_110421865656137_100000649716816_124180_4074926_n.jpg


14106_110421902322800_100000649716816_124188_6194274_n.jpg


Car was now ready for another power run and achieved 213hp, a gain of 6hp and only a drop of 1hp from when we first arrived.

14106_110421908989466_100000649716816_124190_5607802_n.jpg


Then Ed at Fusion set to work on the dyno using the freshly installed KPRO.

14106_110421852322805_100000649716816_124177_1175522_n.jpg


14106_110421918989465_100000649716816_124191_3371554_n.jpg


Low Speed Mapping

14106_110421885656135_100000649716816_124184_3111377_n.jpg


Cam Angle mapping

14106_110421892322801_100000649716816_124185_1265349_n.jpg


And finally, High speed mapping

14106_110421878989469_100000649716816_124183_2186071_n.jpg


Mapping finished and we managed to achieve 227hp using the new more restrictive exhaust.

14106_110421925656131_100000649716816_124193_5453644_n.jpg


As I mentioned above there is a video as well,

14106_110421905656133_100000649716816_124189_3377191_n.jpg


Please leave comments and subscribe :)
[video=youtube;oZgl4zNCp4o]http://www.youtube.com/watch?v=oZgl4zNCp4o[/video]


Thanks

Dave


Intake system is next on the list ;)
 
Thanks for all the comments, and thanks to Ed for transforming my car (Y)

If i'd kept the buddyclub system i would like to think i would have got back the 7hp i lost, plus a little extra based on the better flowing inlet too.

Maybe 235/240hp

With a decent inlet too I reckon i could have got 245 ish
 
Reminds me of Trung, when he has a Buddyclub system on his Civic........he soon went back to a stock backbox because it was insanely loud, especially when the V-Tec switched over o_O. Boy that's a lot of maps........Ed, you're a patient man!

Very nice vid Dave........and very professional Ed ;) Where's the gag-reel Dave hahaha!

I'll be up there in a few weeks delivering the K11 to Ed. Gimme a shout on MSN if you want to attend the mapping of that at Charlie's. I'm sure Mr Ralph can co-ordinate :)
 
Back
Top