Turbo manifold

[wrighty]

Looking for a turbo manifold for a cg13 not fussed if its cracked

 

[ollie240585]

You'll be lucky to find one.

An alternative is to buy a turbo flange and have it welded on to the standard cast manifold. Not ideal but will work if done properly.

 

[wrighty]

I have looked at that but its way to restrictive

 

[ollie240585]

Alternatively is to get an adaptor plate made up. I know some people use these to fit an RS Turbo manifold to a Zetec Engine.

 

[wrighty]

Yep thats last resort i did his on my zetec turbo fiesta but had loads of problems with blowing gaskets

 

[Ed]

The HKS manifold is pretty much a 'log' type. I would say stock one would probably work just as well if done right.

 

[frank]

wrighty

the stock manifold arcweld,s ok, mine has survived 12 months of abuse so far
http://www.micra.org.uk/attachment.php?attachmentid=10034&stc=1&d=1209683567

 

[Broony]

The HKS manifold is pretty much a 'log' type. I would say stock one would probably work just as well if done right.

I have the HKS manifold and it is similar to the standard one except it has a slightly bigger diameter, so i doubt like ED says that if done correct you wouldnt notice much diff.

Or you can pay £260 delivered from HKS Europe.

 

[wrighty]

£260 is steep can get one from japland for less

 

[Broony]

£260 is steep can get one from japland for less

Not a new one, or it wont be HKS

 

[micra_pete]

£260 is steep can get one from japland for less

it will be priced much less in japan, but once its got here its unlikely to be cheaper

 

[Antony]

ive had two of them, and i can assure you they are as rare as hens teeth. and £260 is half what i payed for the first one..

if you can get a genuine hks one for less than £300, your doing very well..

 

[wrighty]

I work for a company that imports parts from japan every 6-8 weeks we have a 40ft countainer full we have a man out in japan who sources the parts we want or we can get through yahoo advantage of this is i will only have to make a small contribution so therfore no vat or shipping costs down side is our next container isnt due to b shipped till october and i need it to get on

 

[Arnold]

and £260 is half what i payed for the first one..

I dont think you paid me £520 for it

 

[Ed]

I work for a company that imports parts from japan every 6-8 weeks we have a 40ft countainer full we have a man out in japan who sources the parts we want or we can get through yahoo advantage of this is i will only have to make a small contribution so therfore no vat or shipping costs down side is our next container isnt due to b shipped till october and i need it to get on

have to say, why are you asking on here then!!?

 

[wrighty]

I want to get the car done and am impatiant

 

[ronin_kid]

I want to get the car done and am impatiant

try waiting for the council to approve the car-port you want to put up - all i want is somewhere dry to work lol

 

[whipit]

I want to get the car done and am impatiant

Go japland, its your best bet!

 

[Antony]

I dont think you paid me £520 for it

lol....fwn a little exageration never hurt anyone..

appart from the captain of the titanic when he said " thats a lovely little iceberg that":laugh:

 

[Arnold]

I know but everytime you mention it it goes up in price, it'l be over a grand soon

 

[Antony]

lol..... im sure its the only thing i exagerate on...