Nissan Micra super s problems

[hunior]

Hy everybody I just buy a 1995 Super S (abs, sunroof, alloys, electric windows, aer condition)modell. I have some questions about it.
1. problem
I heard a knocking when I'm turning at the right side of the car, this song comes from the wheel, it will be the driveshaft I guess.
My first question is that the 1.0 driveshaft is identical with the 1.3 model or not?i think only the abs version would fit)
2. problem
My brake master cylinder is leaking I think it couldn't be repaired, i have to buy a new one from junkyard.
I don't know if exists two model of brake mastercylinder (with abs and without), if exists 1.0 model is the same with 1.3 model ?
Somebody could tell me the right oem code for brake master cylinder?
Thank you for the answers guys.

 

[frank]

post 98 1.0 driveshafts fit ok hunior, and nissa4u for the part numbers

 

[hunior]

Hello I find some differences on these brake master cylinders, I think I have to buy the abs model. First picture the abs verion, second without.

 

[hunior]

Hello, somebody knows if brake master cylinders from other Nissans could fit to the Micra?

 

[h701micra]

Most do with suitable servos to mount them
Primera, almera for example

 

[hunior]

thank you! To continue your idea, can I mount on servos from micra without abs? am I right? Today I have mounted out my Brake Mast, Cylinder, it is tottaly gone...now I dont have any brake at all. So I have to find a rapid solution. My biggest problem is to find a proper cylinder, I gave 15-20 phones, but I couldn't find an abs version cylinder.

 

[h701micra]

Abs is controlled by a computer controlled box not the master cylinder so either should fit

 

[hunior]

But there are two models of cylinders, the abs version has 2 outs, the simple version 4 outs. It will work fine, if I buy the simple version and I screw down two holes?

 

[h701micra]

Ports on a master cylinder join internally so blocking 2 off will be fine
Only thing you'll have to check is that the ports are the same size. I'm confident they will be

 

[hunior]

Thank you very much, I'm very happy now, my micra will run this week!!

 

[h701micra]

Keep us posted and test and test until your 100% happy. Nothing more important than those brakes

 

[hunior]

Tomorrow I will try once more to find a right cylinder, if i won't have lucky, I will buy a simple cylinder, and will try to adapt it. Stay tuned.

 

[hunior]

thank you very much h701micra, you were right about the pump, after blocking the outs, it fitted 100%.
Now I have some trouble about bleeding the abs system, can anybody tell me the corect way to bleed a nissan micra abs brake system? Do I have to turn on the ignition?
I have bleeded out, but the feel of the pedal it's not ok.

 

[h701micra]

Bleed the one furthest from the master cylinder first. Our case its the rear left. Then work your way in. Rear left, rear right, front left & front right

Abs and non abs brake bleeding procedure is the same

How are you bleeding yours.

 

[hunior]

Thank you for the advice, now I have a proper brake in my Super S. Without you it would not be possible!!

 

[h701micra]

Thank you for the advice, now I have a proper brake in my Super S. Without you it would not be possible!!

Glad your brakes are back to full strength