Need URGENT Help Please

K

Kyle_K11

i posted in the tuning section but i've had to repost in here as i think i put it in the wrong one, sorry people.

does anyone know how to remove the front right panel to get too the water jet motor? it's pretty urgent as my first m.o.t is due in a weeks time so i need to get this fixed. i have a 1.0 96 vibe k11. when i push the indicator stalk it doesn't make a noise but the window wipers work and the fuses are fine which makes me think it's the pump. didn't help myself any by putting plain water in it before the snow came i tried as said about about the "Y" section and i removed the hoses from the jets but still no water.

so basically if anyone has any info or pictures and how difficult it is to access the motor then that would be sooooo much appreciated
 
The arch plastic is held on by two bolts on the underside of the car (drivers side practically just under the water resevoir). Its also pin'd on to the actual arch by clips that just pop out. Once you've undone the 2 bolts you should be able to give it a yank and free it. Pump is just sat into the resevoir and held by a gromit so you can just pull that of too. (Y)
 
i was down earlier but they were 12 quid i think n they seal them so you cant have a sneaky peaky :down:
i've been over the full can going throught the mot checks and this is the only thing (hopefully) holding it back from passing
 
C0llis0n said:
The arch plastic is held on by two bolts on the underside of the car (drivers side practically just under the water resevoir). Its also pin'd on to the actual arch by clips that just pop out. Once you've undone the 2 bolts you should be able to give it a yank and free it. Pump is just sat into the resevoir and held by a gromit so you can just pull that of too. (Y)
Click to expand...

thanks mate x
 
definately sounds like the pumps packed up. Think theres 2 types of pumps (one with a black top and one with a yellow), should be able to pick up a 2nd hand from the scrappy.
 
right got the pump out after a lot of swearing lol. couldn't get good access via the headlight due to one of the bolts being seized so i just stripped back the wheel arc lining and got it out. problem is....... i cant seem to get a part online for it. does anyone know of any good part suppliers?
 
waj1234 said:
This any good?

http://cgi.ebay.co.uk/Nissan-Micra-...CarParts_SM&hash=item3f06b94654#ht_3099wt_905

This almera one looks similar too

http://cgi.ebay.co.uk/nissan-almera...arParts_SM&hash=item255f6a0d5e#ht_3269wt_1139
Click to expand...

thanks alot mate but a think it's sorted now. Phoned the nissan dealership and for starters they couldn't find my car from it's reggie but after giving him my chasis number it was the DVLA that had missed out a letter grr So after we got past that hurdle he says it's £37.91 :down: Phoned the local scrappie that specialises in jap and he said he's got a few for a tenner! off there tomoz so i'll let you know how it goes. Also my left headlight was going straight to mainbeam when i was putting on the side lights and now it's goiung to sidelights and when i put the headlights on it stays on the sidelight so i think it's a wiring fault as there is a loose (blue i think) wire but dont know where it goes :( does anyone have a REALLY close up picture of the passenger side light wiring?
 

Similar threads

R
Urgent! Need help asap!
Replies
2
Views
886
magpie
M
P
Urgent help needed please
Replies
6
Views
1K
pandp
P
hoodedreeper
MOT help! +NEED URGENT HELP+
Replies
10
Views
2K
curtis
curtis
flyboypuoi
Wiper Wiring, need help
Replies
0
Views
897
flyboypuoi
flyboypuoi
M
Urgent question
Replies
4
Views
1K
MPlb
M
Back
Top