K11 Common Problems?

Hopefully going to look at a preface lift k11 today. Are there any common problems with them that I should look out for? Or any bits that are prone to rusting?
 
Hopefully going to look at a preface lift k11 today. Are there any common problems with them that I should look out for? Or any bits that are prone to rusting?
Front cross member rusts badly.
Check sills most preface have had at least a couple of patches welded because of age... Take a old screw driver and tap anywhere that's looking bad.
Ask questions about servicing and anything they may have had done.
Best tip pretend you know more than you do :)
 
hi there,

http://www.micra.org.uk/threads/what-should-you-watch-for-when-buying.53060/#post-543294

this link is very useful for you so good luck for your micra hunting. :)
Thanks for that I shall check it out now.

Best tip pretend you know more than you do
That's my specialty although I shall be taking a friend of mine with me who knows quite a bit about cars and best places to check for rust etc. He used to drive a micra so should be able to give me a guiding hand.
 
Just bought a lovely little 5 door 97 plate k11. She seems in near perfect condition the only slight issue i have with it is that its 5 doors not 3 but i'll get over that.
Thanks for your help guys!!
 
Back
Top