how easy is this air filter to fit?

[cardiffboy27]

any idea how easy this filter is to fit? does it just drop on or will i need other parts ?
cheers all
Ian

http://rallynuts.com/motorsport/K10_Tuning_2079/KN_Racing_Air_Filter_Nissan_Micra_K10_NEW_3138.asp

 

[Bence_Fs]

One of the other guys will be able to help you out more but im sure it wil be like most other K&N filters which screw right onto the throttle body

very easay job to do. took me 15 Mins,

http://homepage.ntlworld.com/goldstar0011/Mighty/Engine/Fitting%20KN.htm

theres a guide on how to replace the filter, hope i was of some help to you

 

[paul_k10_Lx]

5 min if that

take the top off the airpan (wing nut)

if u look at the cam cover there will be 2 screws holding it down remove those

for astecics put them back after removal

take out the old paper filter

lift the air pan and there will be a few hoses to the bottom of it the crank beathers most people buy a small filter for these (halfords or motorworld)

through the center of the carb there will be a long stud with a threaded end

u put the gasket if it comes with one on

slide the k& n on and replace the top wing nut

job done

 

[Arnold]

One of the other guys will be able to help you out more but im sure it wil be like most other K&N filters which screw right onto the throttle body

very easay job to do. took me 15 Mins,

http://homepage.ntlworld.com/goldstar0011/Mighty/Engine/Fitting%20KN.htm

theres a guide on how to replace the filter, hope i was of some help to you

Yours is a k11. Fitment of filters like this on the K10 is not always as straight forward