Cylinder walls ok?

[GBrandone]

Hey guys, i opened my engine and I saw this. Is it repairable ? Marks on top of the cylinder walls

 

[Jorge_EETC]

Hey guys, i opened my engine and I saw this. Is it repairable ? Marks on top of the cylinder walls View attachment 73955

I can only see soot build up, can you take a closer picture to the cylinder walls?

Enviado do meu MI 8 através do Tapatalk

 

[GBrandone]

It really was that! Here’s some photos after a proper clean
Thanks Jorge!

 

[Jorge_EETC]

The wall still have the factory scratches. It's still on a good condition

Enviado do meu MI 8 através do Tapatalk

 

[fuzzy-hair-man]

There is probably a lip at the top of the bores where the top ring doesn't reach the top of the bore which will allow you to roughly assess wear, after that I'd get a machinist to check size, taper, and concentricity if these are out of spec then a bore and hone, if not a hone and you could reuse your pistons, depending on your plans.