0-60 times in Micra?

[XPS420]

What kind of 0-60 times are you boys getting?

In my one i done 3 runs this is what i got in order.

9.7 - Awful start
8.8 - Great start wasn't expecting anything better
8.5 - Surprised

I will try to get some videos too.

 

[Scott]

Standard time for a 1.0 is meant to be 15.9 and 1.3 is meant to be 11.6.

So yours looks pretty good. What mods do you have? Assuming its a 1.3 ye?

 

[XPS420]

Its a 1.5 DCI

Chipped
Boost Increased
Custom Exhaust
Air Filter With tubing for forced air
Slightly wider wheels - Better traction
Coilovers - Help with Traction allot
Tiny bit of weight saving going on in the boot

 

[Scott]

Ahhh diesel.... Torque!

 

[Shaun]

Ahhh diesel.... Torque!

Also a K12
my 0-60 depends on how late i am for work lol

 

[Guy]

my 0-60 depends on how late i am for work lol

Awesome mate :laugh:.

 

[mov]

Thats surprisingly good times pal

 

[Antony]

i used to get about 7-8 secs... just above 7000rpm in second was 60+mph. and it hit that wheelspinning...

 

[John_1.0]

Probs a few mins. (Y)

 

[frank]

just tried my misses,s 1.0 with 1.3 inlet cam and modded mani.... 14 secs lol

http://www.youtube.com/watch?v=8uQ3nbPKd5U

 

[slamdunk]

Stock (ish) 1.5dci pretty much 10 seconds.

 

[XPS420]

http://www.youtube.com/watch?v=8JtP27hUgdk

Sorry for the bad quality. This is on private property and the driveway isn't straight which is why i am turning the steering wheel and camera goes of the speedo.

 

[Stani1029]

Mines was 5.5-7 seconds

 

[Shaun]

Mines was 5.5-7 seconds

yeah but you were charging at the time lol

 

[Ian]

i used to get about 7-8 secs... just above 7000rpm in second was 60+mph. and it hit that wheelspinning...

Then you we're actually doing 60mph then if you were wheel spinning >_<

 

[Guy]

Mine's supposed to be about 9.7 but feels alot quicker with full exhaust .

 

[Low Rider]

Never tried it in a K12, I test drove a 1.4 but that put me off so never went near one again.

i used to get about 7-8 secs... just above 7000rpm in second was 60+mph. and it hit that wheelspinning...

7100rpm is allegedly 60mph on a set of 195/45 on a K11 1.3 but you try setting that on a G-Tech. We top out at 7500 with the limiter set at 7800 and I still need 3rd. According to most calculators that should be 66mph and it's still not enough.....somehow these calculators seem to be out by quite a bit or the older G-Tech's are bogus