Search results

Just want a second opinion really, will a box from a dizzy k11 1.0 fit coilpack 1.4? Am gana be travelling over 100 miles to collect one thos weekend

I am getting a gearbox this weekend and will attempt to do the change soon...got few questions beforehand Where would you use to hold the engine with engine support beam? I am thinking of buying the below one, hopefully it is fit for the job Anything else I should be checking whilst the box is...

Nice one mate

£150? Is that how much they normally are?

As the title says, I am after K11 facelift automatic gearbox (preferably from 1.4 engine)

Anyone got a picture of k11 automatic driveshaft? I wana compare to make sure I dont have manual one

driveshaft/cv joint sorted but still not driving - I have done the diagnostic test on the below page but the lamp doesn't blink at all, I guess I will have to take the whole thing out:( https://www.micra.org.uk/threads/ncvt-problem.48828/ "Fault Code No Number - Lamp does not blink - Check all...

ok, the driveshaft is out the problem was the tiny pin holding the cv joint was missing - where can I get that pin? or is it better replacing the whole thing?

I had a same problem yesterday and it blew the fuse for all the electrical inside the car (dash, speed, fuel, cd, inside lights)...the car wouldn't start for 30 minutes as well but after replacing the fuse and waiting for 30 (I read some where on the net that the ECU shuts down and needs time)...

it is just like changing engine oil, jack up the car (be safe) then look under the the gearbox is (should be on the passenger side)........there is drain plug so undo it and make sure you capture the fluid, you just refill it through the gearbox dipstick hole.

I am struggling to find the electromagnetic brush, my gearbox is slightly different (mine is a replica of the one on post 11) to the one shown on andy's post so it is not to the left of the dipstick, anyone know where to find it? On a separate note, I have noticed the driveside cv joint is...

I will take out cv joints and driveshafts this weekend, what should I be looking out for? Are the manual and automatic driveshafts different or the same? Am thinking maybe they installed the wrong driveshafts or something Project gearbox strip down starts tomorrow (depends on the weather;))

Thank you Andy5077, I have already taken the battery, battery tray and fuse box holder but will have to get torque wrench before removing it. I have got Haynes manual as well so will have to read those chapters too. Thanks again mate, sure I will be back with more :)

Where will the electro magnetic switch be? I went to Andy 5077 page and cant seem to find any post about post 2000 auto gearbox

It is me again:) Engine code CGA3DE Title should say 1.4 but I cant edit it. The car is in really good condition and only done 45k but has no drive, when gear selector is moved to R, D or L you can hear engine RPM change. I press on the gas pedal and the spedo is not moving at all. I will...

Has anyone used anything other than Nissan CVT Fluid NS-1 for their post 2000 k11? Nissan CVT Fluid NS-1 seems to be expensive and Dexron IIE or Dexron III were for Pre 2000 I believe. if there is no alternative then anyone know a reputable place to get one?

Conflicting info on all over the net on whether it needs changing or not.

Micra K11 (2000) 1.4 Automatic The car doesn't drive at all, the sound of the engine changes when you put a gear, I have checked underneath the car and there is oil all over the gearbox. There is dipstick to check the CVT fluid (Gearbox oil I think) and there wasn't anything at all. What I...

Thanks guys. The car arrived today, I thought it was 1.0 and wanted to use as donor car for my Mrs' Micra but it is 1.3 (1348 CC) Automatic sport........I am gana be keeping this one and see if I can fix the gearbox problem.

I need I after a bit of info really, I was offered K11 1.0 Automatic that doesn't drive, 2000 reg (starts and the car reverses but no forward drive) only problem is, the car is in London and I am based in the midlands some 100 and so miles away. does anyone know someone who can get it delivered...