thats where my little electronic tacho comes in useful matt, it records the "running hours" like the aero industry doOpps that wasn't very clear, was shattered after a long drive home from Burnley!
Life'ing the wishbones i.e. Replacing them after a set time reguardless of any visable issues, will start at life'ing of a year. I don't want to experience a snapped wishbone again!
Had a good weekend at BSR Racing with @h701micra sorting out the suspension set up lowered, stiffened and new adjustable panhard rod. Nice weekend, Nice bloke, Nice work
Also finally got a map light wired into the car for my navi, never done wiring before but managed it fairly ok, actually pretty proud haha
Didnt take a final pic, forgot but took some others.....
He's not that nice when he's pellets at you
Got your steel sleeve made up now too just those bushes to goHad a good weekend at BSR Racing with @h701micra sorting out the suspension set up lowered, stiffened and new adjustable panhard rod. Nice weekend, Nice bloke, Nice work
Whut?! You were like "imma shoot you stupid" and I was like "mkay" then the night comes and your like "feck that you like some kind of ninja"...He's not that nice when he's pellets at you
But the puppy loved youHahaha...I never had the privellage of being shot sadly. Just abused by many, many animals
Got your steel sleeve made up now too just those bushes to go
I'm off to get my scales next week got it all planned out
Whut?! You were like "imma shoot you stupid" and I was like "mkay" then the night comes and your like "feck that you like some kind of ninja"...
But the puppy loved you
Yea we were making interchangeability simpler if you rememberSteel sleeve for...panhard? Hopefully im getting insured on the wee micra soon so may be able to pop up for a day to sort it out
Yea we were making interchangeability simpler if you remember
Aye I'll give you a message as n when they're ready
Hope you've kept that spanner safe
That wasn't bad considering I was expecting much worseOhhhh yeah I remember
The spanner is safe, went round the car today and got everything tight... All was good apart from the rear height adjusting ring, just needed a little tightening
May have even managed to un-seize the panhard as well today, not 100 sure though as i didn't take it off
That wasn't bad considering I was expecting much worse
My big vice is there n bolted down now so we could properly lever it if we wanted
Ah yea, not long :/Depends, fingers crossed I can find time before the 6th December
Got your steel sleeve made up now too just those bushes to go
I'm off to get my scales next week got it all planned out
Whut?! You were like "imma shoot you stupid" and I was like "mkay" then the night comes and your like "feck that you like some kind of ninja"...
But the puppy loved you
Lagswitch in da real world initzPretty much, I got shot and you were last on our team, and no one found you for like 20 minutes, errbody was like "u wot, he must be hacking" lol
Hard to tell, theyre all so similarI want to say bug eye impreza?
I would but cost of shipping them to Ireland is the problem. Try every possible place before looking further afieldbuy a set off @davyboy ?? he has like 100000 of them lol
Nope, blobeye! I think that's what they call it anyway.... 03-05 maybe?I want to say bug eye impreza?
Nope, blobeye! I think that's what they call it anyway.... 03-05 maybe?
Either way it's no match for my 1.0
Sent from my iPhone using Tapatalk
got my wheels on, rolled the #### out of my arches, still not enough on the rear because was still rubbing, took my bumper off and gotta cut my rear bumpers mounts so probably gonna get dad to make up a bracket or something to fit it so it doesnt rub, more work on her tomorrow then!
only way to do that at the back is to get some new springs and cut them to like 3 and half coils haha, gonna go balls deep and just keep rolling and make it fit the wheels whatever happens, determined!Raise the car a tad?
only way to do that at the back is to get some new springs and cut them to like 3 and half coils haha, gonna go balls deep and just keep rolling and make it fit the wheels whatever happens, determined!
Very nice mate, hammer help?
Oh hello Micra #5... Has a roll cage too, convenient!
Sent from my iPhone using Tapatalk
If I open the garage there's a yellow one.... With blue bits!You like blue I take it ? You just swapping number plates on them girls ?
Used to run around on beer bottle labels for tax discs back in the day ha ha, only got a telling off if caught anyway !
went to see my brother to see why my tyre kept going down, found out my bandeds leak air which isnt a suprise, he said he can put some sealant on them somewhen but would be a 24hr job, ill do that when he welds up my exhaust that i also bought, universal back box and replacement bendy section on its way! also finished my first 2-10 shift and came out to my car absolutely covered in ice, looks amazing on the paint!
I'd be more worried about the shoddiness of the welds.not made very well if they leak air :L
Someone bumped it in the street. Poor Melody!
Sent from my iPhone using Tapatalk