Wanted non squeaking front wiper linkages

[TonySLX]

Motors fine but need the rest of the assembly as mine is screeching.

 

[TonySLX]

Motors fine but need the rest of the assembly as mine is screeching.

For a 1.0 1995 Micra 2 door .... in case it makes any difference.

 

[h701micra]

You tried greasing it up?

 

[TonySLX]

You tried greasing it up?

I havent yet ........... had to do it on the other Micra and tried greasing it but it made no difference .. spose i could give it a go .... just in too hot to be bothered mode lol.

 

[h701micra]

I know that feeling. Had it the past few days. I use cv grease. It seems to work well
Wd40 or 3in1 oil sprays might help for now

 

[TonySLX]

Well stripped it all out but the two spindles are shot..... took off the circlips and sealing rings ... tried to free up a bit .... but dead...... so all i am after is the two triangle spindle pieces that the wipers fit to (white plastic triangle with spindle to drive wipers going through it)

If any one has them ?

 

[TonySLX]

Did try to get spindles out of plastic housing but after hitting it with a hammer quite a few times i think its more likely i would break the plastic housing.....

 

[h701micra]

I think you'll be more likely having to get a new linkage

 

[TonySLX]

I think you'll be more likely having to get a new linkage

I reckon your right .... There are a few on fleabay .. but if i go down a breakers i will pick one up half the price.

 

[TonySLX]

I reckon your right .... There are a few on fleabay .. but if i go down a breakers i will pick one up half the price.

And presently ... last thing i need is wipers lol

 

[h701micra]

With this heat your screen would be dry before your wipers had chance

 

[TonySLX]

Well I am going to call it the Magic Micra.
I turned on wipers today and all there is is a tiny squeak ... so i guess all the silicone lube, oil and grease has worked its way in overnight ...... result