For sale due to breaking of M Reg 1.3 Super S k11
Best bang for buck mods!
1x Front Whiteline 22mm heavy duty Anti-Rollbar with polybush mounts and brackets £ sold
1x Rear Whiteline 22mm heavy duty Anti-Rollbar with polybush mounts and brackets £100 sold
Front and Rear 60mm Matt Humpris Tarmac Springs and Spax Gas Shocks £sold
100nx Brake Calipers, M Tec Drilled and Grooved discs and ebc ultimax pads ( discs and pads 1000 miles old) £sold
Pulsar short shifter with genuine quaife gear knob £sold
Few other fun bits
Bee*R Rev Limiter and Launch control including modified dash blank and red flick switch £sold
Flocked dash £sold
OMP front strut brace painted in silver £sold
NodSpeed rear strut brace and mounting tool £sold
NodSpeed on car adjustable panhard rod £sold
Eibach Camber Bolts, never used for driving, £sold
K11 boss kit £sold
Black Rear Carpet cut to shape with wheel well slot £10
Perspex door cards covered in 3D carbon vinyl £10
Cobra Monaco S seats mounted on standard micra runners, sit nicely and not high in the cabin...fronts are bolted on and rears are professionally tig welded. Minor rips in driver bolster but nothing major, due to daily driven use. £sold
GA16 Airbox with Pipercross panel filter (part of 95bhp set up) £30
Janspeed 4-2-1 with joins welded up and flexi joint welded in. Currently having a section welded (part of 95bhp set up) £100 Ono
Janspeed Stainless 2" Catback with 2" stainless decat. 2" rolled out exhaust tip with roughly 3" of poke from rear bumper. My favourite exhaust system out of all I have tried and seen, sounds incredible, with lots of rasp and such good build quality! (Part of 95bhp set up) £180 ono
15" ARC Alurad 15x7j et25 4x100 alloys. Have a 3" lip, look pretty good and not seen them around before! but don't suit my civic. Need a refurb but I have spent several hours sandblasting them...see pics £150 Ono
May have missed some parts out. Am beginning the breaking process so parts will becoming available soon...whole STANDARD car will be for sale for SPARES AND REPAIRS ONLY with no log book from 16th of June. Shell has covered 140k but engine was replaced for one with 70k at the end of last year. Welcoming offers on the shell. Needs a sill replacing. Will come with centre de-cat but rest of exhaust is standard. Has a PAS quick rack without using the pas pump and is already stripped so could make ideal track car for someone!
Feel free to message me with any questions...
Cheers
#becauseracecar
Best bang for buck mods!
1x Front Whiteline 22mm heavy duty Anti-Rollbar with polybush mounts and brackets £ sold
1x Rear Whiteline 22mm heavy duty Anti-Rollbar with polybush mounts and brackets £100 sold
Front and Rear 60mm Matt Humpris Tarmac Springs and Spax Gas Shocks £sold
100nx Brake Calipers, M Tec Drilled and Grooved discs and ebc ultimax pads ( discs and pads 1000 miles old) £sold
Pulsar short shifter with genuine quaife gear knob £sold
Few other fun bits
Bee*R Rev Limiter and Launch control including modified dash blank and red flick switch £sold
Flocked dash £sold
OMP front strut brace painted in silver £sold
NodSpeed rear strut brace and mounting tool £sold
NodSpeed on car adjustable panhard rod £sold
Eibach Camber Bolts, never used for driving, £sold
K11 boss kit £sold
Black Rear Carpet cut to shape with wheel well slot £10
Perspex door cards covered in 3D carbon vinyl £10
Cobra Monaco S seats mounted on standard micra runners, sit nicely and not high in the cabin...fronts are bolted on and rears are professionally tig welded. Minor rips in driver bolster but nothing major, due to daily driven use. £sold
GA16 Airbox with Pipercross panel filter (part of 95bhp set up) £30
Janspeed 4-2-1 with joins welded up and flexi joint welded in. Currently having a section welded (part of 95bhp set up) £100 Ono
Janspeed Stainless 2" Catback with 2" stainless decat. 2" rolled out exhaust tip with roughly 3" of poke from rear bumper. My favourite exhaust system out of all I have tried and seen, sounds incredible, with lots of rasp and such good build quality! (Part of 95bhp set up) £180 ono
15" ARC Alurad 15x7j et25 4x100 alloys. Have a 3" lip, look pretty good and not seen them around before! but don't suit my civic. Need a refurb but I have spent several hours sandblasting them...see pics £150 Ono
May have missed some parts out. Am beginning the breaking process so parts will becoming available soon...whole STANDARD car will be for sale for SPARES AND REPAIRS ONLY with no log book from 16th of June. Shell has covered 140k but engine was replaced for one with 70k at the end of last year. Welcoming offers on the shell. Needs a sill replacing. Will come with centre de-cat but rest of exhaust is standard. Has a PAS quick rack without using the pas pump and is already stripped so could make ideal track car for someone!
Feel free to message me with any questions...
Cheers
#becauseracecar
Last edited:
