Spacers on a k11?

[Robb]

Just a quikie, anyone know how hard it is to knock the wheel studs/bolts out?

I am considering getting some spacers but cannot decide whether to get longer studs or just get the kits with stud extenders. hmmm.

 

[ollyc98]

Get longer studs, I hear it's pretty easy, put a wheel nut on the end and give it a whack with a hammer, makes sure you get the right studs though as nissan did a few different types

 

[joesouthgate]

frank's done it Suprised he hasn't posted actually fwn

 

[frank]

MM

olly allready posted what i would have said :grinning:
when robb drove mine last week, he commented on my spacers (must have spurred him on eh )

 

[NeX]

Matt H does some longer wheel bolts, and yea they are splined they just push out and tap in the new ones

 

[ollyc98]

I found they were quite cheap on ebay

 

[Robb]

Yeah frank it just looks better having a more chunky stance, rather than the wheels sitting in the arches all dinky like. not fussed about mahoosive wheels at the mo (which prob wouldnt need spacers of course) was gonna pm you but i thought i would get i wide opinion.

Cheers all, i cant decide how much wider i want them now :upside:

 

[frank]

robb

i ended up widening the rear a lot more than the front (10mm and 30mm each side iirc)

 

[Robb]

I was wondering whether to just widen the left side rear, as its already thrown to the right lol. then have 20mm on the fronts.

Seen these http://cgi.ebay.co.uk/20mm-spacer-k...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14 50quid though! :wow: bit much considering the bolts are only a fiver elsewhere.

 

[ollyc98]

Don't forget you need 16 bolts and then the spacers, this isn't the sort of thing you wanna be cheap with, £50 seems pretty good