Panhard Rod ===========================

[Helloween]

Hi, as stated im looking for a Panhard Rod to sort my K11 lowering at the rear axel.


J

 

[will930]

fo to noddie does a topotch one! look on my blog i have pictures of him fitting mine

 

[Helloween]

Hi wil930, sorry to be a pain mate, could you send me the link to it... :grinning: also how much would it cost to make up one?

Cheers

J

 

[Scott]

Theres one on ebay the now

 

[legendryan]

Im after one also! Ill check it out

 

[Helloween]

Cheers scott,

J

 

[peposhi]

Did you not fit Frank's bushes, Jimi

 

[Helloween]

Hi peposhi, frank did say couple weeks, also a mate gave me a call today wanting a panhard rod so which ever comes first i take plus franks bushes for me mate lol..

Frank, you have PM again!! :laugh:

J

 

[will930]

Hi wil930, sorry to be a pain mate, could you send me the link to it... :grinning: also how much would it cost to make up one?

Cheers

J

http://www.micra.org.uk/threads/41335-My-Micra-Dot-Rising-To-The-Top!-)/page7
page 7
post 302

 

[peposhi]

Good luck, mate(Y)
Hope you get it sorted soon

 

[Helloween]

Cheers will930 for the direct link, looks awesome mate!!!! love it.......

and also @ peposhi, cheers mate ill hopefully get it done a.s.a.p.


cheers

j

 

[legendryan]

Does the rod have to be welded on

 

[Noddie]

Does the rod have to be welded on

No, they bolt on mate what made you think it had to be welded?

 

[legendryan]

I think I got a bit confused on will's blog where sparks were flying. My bad.

My 35/40 springs came through this morning, and feel I should really get an adj panhard rod. Is it as simle as jacking the car up, taking the old one off and fitting the adjuastable one, then tighten it up? Have had a little look around and thats what I have gathered.

 

[Noddie]

I think I got a bit confused on will's blog where sparks were flying. My bad.

My 35/40 springs came through this morning, and feel I should really get an adj panhard rod. Is it as simle as jacking the car up, taking the old one off and fitting the adjuastable one, then tighten it up? Have had a little look around and thats what I have gathered.

Oh i see the sparks were me grinding the old bush off.
Well, the only hard bit is if the right hand bush is fixed itself on. you have to cut it down the side and bash/lever it off. Other than that its pretty easy.

 

[getawaycar]

If you're still stuck for one I've got one on ebay now....

...click the link....

 

[Scott]

Getawaycar : pleeeeaseee sell me the poly bushes privately?

 

[legendryan]

Ah I see! And for the new brushes - wheres the best for them. Frank was selling some or have they all gone?

 

[Noddie]

If you get a new rod you will get bushes with it... Frank had adjustable bushes (used with the stock rod to adjust length).

 

[legendryan]

I see - so if I was to buy one of franks brushes I wouldnt need an adj rod as they would change the length?

But if I did buy an adj rod, I wouldnt need these brushes?

Forgot to say, thanks for the help :grinning:

 

[Helloween]

If you buy franks bushes you wont need an adjustable rod franks bushes are plug and play and retain the original k11 rod, if you buy an adjustable rod it will come with bushes as said and then you will need to adjust the rod for the aquired length needed . these are 2 options to choose from.

J

 

[decxter]

another vote for noddie's adjustable panhard rod there class.

 

[mph]

Adjustable panhard rod

Hi Mate,

We have in stock off car adjustable panhard rods, On car adjustable rods and replacement bushes to make your own.

Ring me on 01865 748000
Matthew
www.humphrisoxford.co.uk