Missing nuts and bolts?

[jon baker]

I think I am missing some nuts and bolts from this mounting? I have found an allen bolt (about an inch long just sat on the crossmember) anybody got a diagram of this bracket?

 

[jon baker]

Are there two bolt missing?

 

[MattInARedMicra]

I can see at least one rust stain where a washer has previously sat, it's hard to tell if the bracket has moved it may have rotated a bit

I can't tell where abouts in the car it is

 

[jon baker]

it is behind the gearbox

 

[.Maarten]

Prolly the cable above it was attached to that. Those clips can break

 

[jon baker]

Prolly the cable above it was attached to that. Those clips can break

Hi, what cable is that?

 

[jon baker]

I had lost three bolts out of the engine mounting. bolts back in all ok again!

 

[Deleted member 31521]

Yea you can actually see the misalignment at the right side where the bolt is missing.

I was having a problem when putting in reverse the car was rolling forwards it turned out the carpet was preventing the clutch pedal from fully engaging.
Was really pleased because I thought the reverse gear was damaged.
Sent from my ASUS_T00P using Micra Sports Club mobile app

 

[jon baker]

Yea you can actually see the misalignment at the right side where the bolt is missing.

I was having a problem when putting in reverse the car was rolling forwards it turned out the carpet was preventing the clutch pedal from fully engaging.
Was really pleased because I thought the reverse gear was damaged.
Sent from my ASUS_T00P using Micra Sports Club mobile app

I cannot believe how quiet the engine noise is now, it makes a hell of a difference.