Micra Si weight loss programme.

I posted a weight loss list on here months ago. now its changed i cant be bothered updating it, so i'll just put a new one up. My micra is BARE, with the exception of mosts of the dash, as ive not found any clocks i like enough to replace it with yet.

part total weight part weight
start weight 800.000 : 0
-spare wheel 788.500 : 11.5
bolts etc. 788.050 : 0.45
rear belt 787.150 : 0.9
rear belt 786.250 : 0.9
handbrake base 786.120 : 0.13
rear light shroud 785.980 : 0.14
speaker X2 785.040 : 0.94
head unit 783.820 : 1.22
driver door rods 783.660 : 0.16
spare wheel fixbolt 783.560 : 0.1
middle belt 783.100 : 0.46
driver door armrest 782.840 : 0.26
boot inspection panel 782.040 : 0.8
door inspection panel X2 781.280 : 0.76
handbrake gaiter 781.240 : 0.04
belt buckles 780.910 : 0.33
spare wheel cover 780.390 : 0.52
misc parts 780.110 : 0.28
misc brackets 779.780 : 0.33
seat base 776.480 : 3.3
seat backs 765.080 : 11.4
carpets 761.980 : 3.1
door card parts 758.580 : 3.4
interior trim panel x2 757.780: 0.8
parcel shelf 754.380 : 3.4
flappy flaps 754.230: 0.15
jack 752.620 : 1.61
aeriel 752.545: 0.08
wheel brace 752.045 : 0.5
inlet pipe 751.620 : 0.43
rear cards 748.620 : 3
front air intake 748.170: 0.45
random plastics 746.970 : 1.2
rubbery thing 746.720 : 0.25
misc boot plastics 746.670: 0.05
interior screws 746.545 : 0.13
door handle inners 746.495 : 0.05
under steering wheel 746.245 : 0.25
fuse cover 746.195 : 0.05
handbrake gaiter & plastic 745.695 : 0.5
door protection 745.445 : 0.25
center console mounts 745.395 : 0.05
air filter 745.295 : 0.1
air box top 744.670 : 0.63
head lining 743.370 : 1.3
rear carpet 741.770 : 1.6
front low trim pieces 741.270 : 0.5
EM heat shield, others 738.470 : 2.8
aerial, wire, others 733.470 : 5

I would like to note that this final weight of 733Kg is as classed with a full tank of fuel, if i run the car on the fuel light (5L remaining), the car weighs 696.470Kg :) thats lighter than a classic Fiat Panda!!!!!

If anyone is coming to Awesomefest this weekend and wants to talk micras my number is 07776072212, just give us a call and tell me where you are we can have a good chat!
 
Rear wheel hubs can be cut down, so can the altenator mount and lose the front mount and cut it out the centre member. No spoiler? No sunroof? No bump strips? 1 wing mirror? String with toggles inside to act as door handles? Perspex windows?
 
window wipers operated by strings attached to the drivers leg perhaps? lol

why haven't you taken off the rear wiper and motor and panel from the back?
 
I'd quite like to know the weight of a standard K11 SuperS steel wheel. I remember frank saying the K11 came with a 13x5J steel wheel but on closer inspection mine are 13x4.5J.

Perhaps the earlier K11's were different as that's the same steel wheel used on my GX with a 155/70/R13 instead of the 175/60/R13 that came on the SuperS'.
 
I'd quite like to know the weight of a standard K11 SuperS steel wheel. I remember frank saying the K11 came with a 13x5J steel wheel but on closer inspection mine are 13x4.5J.

Perhaps the earlier K11's were different as that's the same steel wheel used on my GX with a 155/70/R13 instead of the 175/60/R13 that came on the SuperS'.
just double checked and all of mine are 5j x 13 et 45 (5kg) super s alloys are 5.5j x 13 et38 (6.5kg) and facelift steels are 5j x 14 et45 (6.5 kg)
 
Thanks Frank, that helps with the figures for the suspension setup. I'll double check mine next weekend when I'm back in the UK.
 
I'd like to know how much the sunroof and mechanisms weigh. As it looks like a fairly heavy weight to have in the roof. Any plans on replacing it?
 
Rear wheel hubs can be cut down, so can the altenator mount and lose the front mount and cut it out the centre member. No spoiler? No sunroof? No bump strips? 1 wing mirror? String with toggles inside to act as door handles? Perspex windows?

knock catlelist out of standard exhaust , decat
 
Back
Top