k11 sideskirts, lips, spoilers & splitters thread.

[squarepants]

was thinking today about what splitters and sidekirts etc fit micras...

could be classed as a guide?? mods feel free to move it into DIY if you feel it is? not sure what to call it lol.

abit of an eye opener for new members and what not.

so heres a few that i know of. feel free to add onto this thread

bear in mind some side skirts and splitters might need abit of trimming to suit.

splitters:
renualt megane
renualt espace
renualt laguna
vw polo mk4
nismo
proton front lip

side skirts:
rover 400
primera gt
suzuki baleno
nismo flair
ms desgins

spoiler:
vibe, super s, sr, si wrap around
1998>2001 top lip
nismo
impul
rare (oem iirc) duck tail spoiler
fiat bravo tranparrent spoiler

i was going to add photos but would take me hours! lol

 

[skymera]

I'm using a Vauxhall Zafira A splitter, needed a bit of trimming but fits well, can add that to the list.

Sent from my GT-I9100 using Forum Runner

 

[Jacko]

Good guide , at least now I have a rough idea what will fit on the car

 

[markbognor]

Great Idea Squarepants.

Some photo examples of each would be helpful. Here's a few but I don't pay all that much attention to them so can't remember who has what.

Splitters/Lips

Proton [Persona - I think]

In it's natural habitat.

Volkswagen 6n Polo

It's previous home.

Seat Leon Cupra-R

As it came out of the factory

I'm sure there is a car on Cisco's that has a base Mk3 Astra splitter, but I can seem to find it.

 

[squarepants]

heres a few more...
megane front splitter and primera gt skirts

espace splitter

laguna vented splitter

nismo lip

late spec polo one (not sure what year or model :S)

rover 400 skirts

eg civic skirts and laguna non vented splitter

 

[prefaceliftlife]

is there a pic of a bravo spoiler on a micra around, also does anyone know if glanza spoilers will fit

 

[squarepants]

iv'e tried a glanza spoiler mate and there about an inch to wide each side.

theres a silver micra off micra.com.au with a bravo spoiler on ill put i pic up tomorrow

 

[djtweaker]

normal civic skirts will fit to (old model)
i self had a cupra lip (seat) on the front and that fit's also on the back

for the front i think that the front lip of a swift sport will fit to (late model)

 

[freeze19]

Thanks for this topic !

Proton [Persona - I think]

it don't come from the persona but from the satria (based on the mitsubishi colt/mirage fourth gen) :
http://www.mynrma.com.au/media/proton_satria_gli_1997.jpg

 

[fixedfool]

dont mean to dig this up from the past ... but what splitter is that?

 

[fixedfool]

i see its from a persona but whats a persona when its at home...

 

[lee k0011]

i see its from a persona but whats a persona when its at home...

It's a Proton. Don't think there are that many of them about..

 

[fixedfool]

It's a Proton. Don't think there are that many of them about..

damn!! because that splitter/ lip whatever it is, is f**king sweet!

 

[dmaster]

mk1 punto spoilers work quite well

 

[MicraPRO]

Ive got a 05 plate vectra splitter on mine... quite a deep splitter.

 

[fixedfool]

Ive got a 05 plate vectra splitter on mine... quite a deep splitter.
View attachment 23151

does it just bolt straight on, or was there a bit of cutting/drilling involved?

 

[MicraPRO]

does it just bolt straight on, or was there a bit of cutting/drilling involved?

Little bit of cutting to make it fold in the right places and a trim off the edges and then drilled and cable tied through the drill holes... nice and sturdy tho

 

[fixedfool]

Little bit of cutting to make it fold in the right places and a trim off the edges and then drilled and cable tied through the drill holes... nice and sturdy tho

ill give it a bash. looks clean!

 

[MicraItaly]

front lip spoiler NISMO for facelift

 

[dmaster]

front lip spoiler NISMO for facelift

i'd love one of those

 

[McMicra]

Anyone know if glanza mid spoiler would fit?

 

[MicraPRO]

Anyone know if glanza mid spoiler would fit?

Iirc its too wide.

 

[McMicra]

Hmm

Want a mid spoiler but trying to find micra ones impossibru

 

[MicraPRO]

Hmm

Want a mid spoiler but trying to find micra ones impossibru

I know I fall into the same group...

 

[Kamarley]

Sounds like its gonna be a custom job with lots of filler and fibre glass!!

 

[triplemmm]

the old vauxhall combo splitter fit straight up

 

[MicraPRO]

Sounds like its gonna be a custom job with lots of filler and fibre glass!!

Unfortunately mate for this I wish there was a dislike button... I can use fiberglass and body filler but christ even I think that would drive me mad...

 

[Kamarley]

Lol same!!

 

[antoni preston]

anyone have any side skirts for sale? i would like them cheap as does everyone. mines a bolero but ive heard it the same sides.

 

[Kamarley]

diy job almost complete


LEEEEEAVVVEEE ITTTTT YEAHH!!!

 

[r-reg-sr]

wow man has a shed ! i dont

 

[Kamarley]

wow man has a shed ! i dont

It's the only send I will own don't drive a shed that's a crime!


LEEEEEAVVVEEE ITTTTT YEAHH!!!

 

[MatD]

Proton [Persona - I think]

Seat Leon Cupra-R

They are both really nice, is there a build for that black one?

 

[mrcheese]

anyone have any side skirts for sale? i would like them cheap as does everyone. mines a bolero but ive heard it the same sides.

Please dont put skirts on the bolero... its such a rare car.

 

[McMicra]

Sod it might aswell photowhore mine a touch more

Not sure on the exact model but I do know its a Seat, so if anyone finds another please do share what car it came from

 

[antoni preston]

Please dont put skirts on the bolero... its such a rare car.

Yup you are right i suppose its best to keep it original. Im in two minds with the car as my daughter drives my car as well and she really hates the auto box

 

[Giplansken]

I'm currently looking to fit a rear lip to my micra as I am just starting to do work on it, could anyone point me in the direction as to where to get a rear spoiler?

 

[micra racer]

This is spats off of an impreza rear bumper turned upside down there is a space in the middle i think its big enough so that u can put 1 of the square import style plates in the space

 

[micra racer]

 

[IrishK11]

Will the SR wrap around spoiler fit any k11? I have the last face lift 2002 model.

 

[MicraPRO]

Will the SR wrap around spoiler fit any k11? I have the last face lift 2002 model.

Yes

 

[IrishK11]

Great thanks! one more question how much should I pay for one? No idea what theyre worth really and the guy is looking for an offer? Appreciate the help

 

[MicraPRO]

Great thanks! one more question how much should I pay for one? No idea what theyre worth really and the guy is looking for an offer? Appreciate the help

Depends on condition if its mint id say you could be looking £25 £30 but dont forget you may have to paint it.

 

[MicraPRO]

The price differs all over the country for some reason.
I got mine for £15 but it wasnt ib the best of nick...
And spraying can be expensive if your car needs a paint code that must be mixed.

 

[IrishK11]

yea see they're harder t get here on the emerald isle so ill throw him an offer anyway, was planning on getting halfords to make up a can and spray it myself. Would i be better to drill holees to mount it or think i can use industrial double sided tape/adhesive?

 

[MicraPRO]

yea see they're harder t get here on the emerald isle so ill throw him an offer anyway, was planning on getting halfords to make up a can and spray it myself. Would i be better to drill holees to mount it or think i can use industrial double sided tape/adhesive?

Thats what I do...
I use black silicon sealant and it works well...

 

[IrishK11]

Sweet will try that so thanks for the help!

 

[MicraPRO]

Sweet will try that so thanks for the help!

You will need to drill out the rivets on the spoiler to remove the captive boltd for it... easy enough to do tho.

 

[Kamarley]

What I did with mine is mount it with the bolts as mine had a spoiler before and then hold I down with a but of sealant down the sides, if you don't have spoiler holes simply mark the spots where the bolts will sit when fitted and drill to holes slightly bigger then the bolt size and job down just make sure you sealant around the holes and around the complete edge of the spoiler so it eliminates the chance of water getting in.


LEEEEEAVVVEEE ITTTTT YEAHH!!

 

[McMicra]

Me and @Vic222 drilled holes for his wrap around in his old car, lined up perfect as we measured the holes in my car