Doug Nov 9, 2012 #1 Any advice? fuel at injectors and spark. no fuel reaching head. EML constant flashing 1100 twin cam. just wont run advice please. Cheers Doug
Any advice? fuel at injectors and spark. no fuel reaching head. EML constant flashing 1100 twin cam. just wont run advice please. Cheers Doug
frank Club Member Nov 9, 2012 #3 NATS problem usually doug http://www.micra.org.uk/threads/check-engine-light-flashes-not-starting.51839/#post-527784
NATS problem usually doug http://www.micra.org.uk/threads/check-engine-light-flashes-not-starting.51839/#post-527784
OP OP Doug Nov 10, 2012 #5 Cheers Guys If i cant solve was thinking of changeing ECU. Can I buy a secondhand ECU and keys and just bolt on? Or do I need any other components. Thanks Doug.
Cheers Guys If i cant solve was thinking of changeing ECU. Can I buy a secondhand ECU and keys and just bolt on? Or do I need any other components. Thanks Doug.
mckenziecz Nov 10, 2012 #6 contact fusion motorsport, he charges 150 quid i believe for an ECU with bypassed NATS
OP OP Doug Nov 10, 2012 #8 Thanx for the link. But been offered a ECU with keys will my transponder and other bits work with it?? Cheers Doug.
Thanx for the link. But been offered a ECU with keys will my transponder and other bits work with it?? Cheers Doug.
mckenziecz Nov 10, 2012 #9 Doug said: Thanx for the link. But been offered a ECU with keys will my transponder and other bits work with it?? Cheers Doug. Click to expand... Doubt it
Doug said: Thanx for the link. But been offered a ECU with keys will my transponder and other bits work with it?? Cheers Doug. Click to expand... Doubt it
OP OP Doug Nov 10, 2012 #10 If cant find problem,will proberbly buy the ECU,IGNITION,transponder been offered one with key for £40. Good move???
If cant find problem,will proberbly buy the ECU,IGNITION,transponder been offered one with key for £40. Good move???
OP OP Doug Nov 10, 2012 #11 Someone has said it could be the sensor on the exhaust. Is this a common fault?
Belly93 to turbo or new lump :/ hmmm Nov 10, 2012 #12 if you swap ecu you need obviously ecu, transponder ring from around ignition and key to match ecu or just the code chip from the key to match the ecu
if you swap ecu you need obviously ecu, transponder ring from around ignition and key to match ecu or just the code chip from the key to match the ecu
Scouse boy Buy & Sell Member Nov 15, 2012 #14 mate check your ECU for water damage. My heater matrix had a small hole and the water had got onto the ECU causing EML to come on and car would randomly cut out... worth a try
mate check your ECU for water damage. My heater matrix had a small hole and the water had got onto the ECU causing EML to come on and car would randomly cut out... worth a try
OP OP Doug Nov 15, 2012 #15 fried the ecu today,bit of smoke and the LED has gone out,enoughs enough,its on ebay cheers anyway
Belly93 to turbo or new lump :/ hmmm Nov 15, 2012 #17 What model k11 is it mate i have a 1.4 ecu, transponder and key chip