Innovate lc-1 help

[pork]

Anyone installed these care to help me out?

This is where I'm at so far

The quick start guide is pretty vague, doesn't mention how to wire the gauge into the lc-1, along with cadlibration LED, and push button.
my laptop is dead so can't load cd manual !

These are wires I've got from sensor

These from gauge

There's a red and black from LED, and two black wires from push button

I'm rubbish at reading instructions, I find wiring diagrams a lot easier!

I know it's a big ask

 

[Skinner_87]

LC1
Red is a switched 12v
Yellow goes to ecu you can just wrap that end up in tape
BLue & White earth them togeather
Black solder the LED & Button to the end of it & earth them to the same earth as the Blue & White
Brown goes to the Gague white wire


Gague:
Red is a switched 12v
Black is the earth
White goes to the lc1 brown
Yellow either earth or a headlight power wire (NOT the dip/dim beam) to dim when you put your lights on

hope this helps: (see attached)

 

[pork]

Can I solder together other lives and grounds from other gauges onto lives and grounds on the lc-1?

 

[Skinner_87]

Can I solder together other lives and grounds from other gauges onto lives and grounds on the lc-1?

I'd say yes with the live mate, the earth the instructions mention they pic up distortion so id just mount them to any decent metal seperate to other dials.

 

[Skinner_87]

updated with all wires above mate post #2

 

[pork]

Brown wire goes to which wire on gauge?

 

[pork]

I'd say yes with the live mate, the earth the instructions mention they pic up distortion so id just mount them to any decent metal seperate to other dials.

So I shouldn't really wire up earths from other gauges, even if its jus for back lights?

 

[Skinner_87]

Brown wire goes to which wire on gauge?

The white gague wire bud

 

[Skinner_87]

So I shouldn't really wire up earths from other gauges, even if its jus for back lights?

Id try and keep all the LC stuff seperate to be honest, i couldnt give you a deffinate answer as im not sure if it would interfear or not

 

[pork]

Cool, thanks mate. Big help

 

[pork]

Are spade crimps a no no too?

 

[Skinner_87]

Are spade crimps a no no too?

Earth on mines a spade crimp mate & gives my no problems

 

[pork]

Cool,soldered most things in gauge pod, but I need one crimp to get me going

No backing out now!

Managed to route wires to dash holes I drilled too without removing it