how to fit longer wheel studding

[danny1.0l]

hey guys im a bit stuck coz i want to fit my longer wheel studs but dont know how to i could manage the fronts but i have no idea how to take the backs off. the studs are 20mm longer so can i wiggle the stud in the drum and also how long time wise would it take me to do on my own

 

[joesouthgate]

markbognor did a guide on this...

 

[frank]

hey guys im a bit stuck coz i want to fit my longer wheel studs but dont know how to i could manage the fronts but i have no idea how to take the backs off. the studs are 20mm longer so can i wiggle the stud in the drum and also how long time wise would it take me to do on my own

the rear hubs are very easy to remove danny, you need a good breakerbar tho (megga tight nut )
http://www.micra.org.uk/attachment.php?attachmentid=13541&stc=1&d=1253050373

 

[markbognor]

Sounds like you want a look at this.

+20 will go in without taking the hubs off.

Should take no more than a couple of easy going hours from getting yer tools out to packing up again afterwards. Unless like me you are a numpty and wind the brake shoe adjusters out too far and have to strip everything down again and re-fit the brakes :glance:

 

[danny1.0l]

cheers guys for the advice im going down my dads this sunday so me and him will crack on with them