First Micra headunit installation problems

[chrome247]

Hi all,
Just bought a micra and the guy who previously had it didn't bother with an iso adaptor now i'm left with this:
http://www.flickr.com/photos/47161389@N06/4460158840/

been to halfords they quoted me £55 to install a kenwood head unit i bought cheap.
They had a look at it and told me it'll need hard wiring to a new iso adaptor.

Any ideas how i could do this myself?

Cheers
John

 

[C0llis0n]

Wont be too difficult. Buy yourself the iso adapter strip the wiring's down and either solder them to your existing wires (or connect using terminal blocks). Might need a haynes to figure out what wire is which (as they might be different colours to the ISO adapters), failing that im sure some guys will be able to identify them for you.

 

[Shaun]

shouldnt be hard just patience really, check you haynes for definate like collision said above (Y) good luck!

 

[porkpie700]

Or go to a scrappy chop off an origional micra adapter, wire it up and then plug an iso adapter onto it. All the wires will be the same colour so it would be a simple case of match and connect...