Door projector light

I opened an Audi door and the Audi logo showed on the floor. Wondering this would be stock or not, I learned these projectors can come cheap via ebay or ali. But that Audi has stock normal lighting in it's door and of course a k11 hasn't.

Here is another example, still that car has it's own lighting. https://www.ebay.com/itm/Car-Led-Li...724198?hash=item23cb5cfca6:g:5rYAAOSwZSRd2R~1

Does anyone have door projector lights in it's k11? I am interested in a Nissan logo, preferably the blue and red one but the white one also will do.
 
These projectors are cheap and easy to mount. Modern car come with projectors but almost always without the logo, only light.

Enviado do meu MI 8 através do Tapatalk
 
It's says in the eBay link, it's activated by a magnet you stick to the bottom of your doorway / the sill covers.

I'm going to order it. Looks cool

Also, found one that's a little bit cheaper ?


Every little helps ?
 
Last edited:
I'm thinking about putting it inside the door tray thing (sorry I don't know the technical term) but it's where you put your bottles and I'm thinking about sticking it in there and then drill a hole for the projecter to shine through and drill a hole for the sensor to meet the magnet
 

Attachments

  • 1.jpg
    1.jpg
    619 KB · Views: 195
I'm not sure I understand in full but this will be a nice meet again with the card board like moisture ridden door panel lacking screws and thus giving audible vibration noises :)
 
I'm not sure I understand in full but this will be a nice meet again with the card board like moisture ridden door panel lacking screws and thus giving audible vibration noises :)

Surprisingly the projector lights came earlier than I expected, only took a week and I installed them today

And the result is awesome. My plan of cutting out the bottom part out by the door card has worked and you can't notice the projector light making it almost look factory.

Here are some pics and a video of how it works

(Video)
 

Attachments

  • IMG_4923.JPG
    IMG_4923.JPG
    1.2 MB · Views: 161
  • IMG_4924.JPG
    IMG_4924.JPG
    1.2 MB · Views: 169
  • IMG_4928.JPG
    IMG_4928.JPG
    1.2 MB · Views: 173
  • IMG_4929.JPG
    IMG_4929.JPG
    1.3 MB · Views: 144
That looks 10x better than I thought it would, the logo even looks 3D

Totally getting one of those, which one did you get and how big of a drillbit do I need?

Yep they do. I got them on eBay


And for the drill bit I don't know as I used dremel to cut the piece of trim out to fit the projector in
 
Back
Top