coilovers ??

[mario1293]

does anyone know if anyone is selling some or where the best places to look to buy ?

 

[karlj]

eBay if you want cheap corsa/polo coilys

 

[mario1293]

ive tried and 1k qas the only one for micras :L

 

[karlj]

If you want proper k11 coilovers then be prepared to pay in excess of £600 for them.

How low do you want to go? Cause my setup has me around the 80mm mark and didn't cost an arm and a leg

 

[mario1293]

im only wanting 60mm but not realy have a clue were to start or what brands are good quality

 

[karlj]

only place i know of to get 60mm springs is matt, give him a bell and see which shocks he recommends

 

[mario1293]

okay il give him a message or frank cause his are 60mm i think

 

[karlj]

Franks running matiz fronts, corsa rear with cut springs i believe

 

[frank]

Franks running matiz fronts, corsa rear with cut springs i believe

matiz complete front legs, and matiz rear springs and corsa shocks rear currently

 

[karlj]

that's not bad I was only of by the rear springs

 

[Walter]

matiz complete front legs, and matiz rear springs and corsa shocks rear currently

more info? you means coilovers?

 

[karlj]

No he means

matiz complete front legs, and matiz rear springs and corsa shocks rear currently

 

[r-reg-sr]

Means tested







sent from something you can type on

 

[micra-mad]

matiz complete front legs, and matiz rear springs and corsa shocks rear currently

hi frank dose the matiz frout leg fit right on the micra with the matiz rear springs and the same with the corsa shocks and what springs do you use on the rear

 

[frank]

hi frank dose the matiz frout leg fit right on the micra with the matiz rear springs and the same with the corsa shocks and what springs do you use on the rear

matiz rears on the rear mate, and you have to swap the topmount over and slot one of the lower holes.
mine have been lowered further by lowering the lower perch (bottom in pic)

 

[scottjames]

Frank what is the ride/ride height like with std matrix struts?

Scott

 

[frank]

Frank what is the ride/ride height like with std matrix struts?

Scott

they,re about 50mm shorter scott, and about the same weight/strength spring, here,s craig,s matiz legs with about 3 coils off (about the same height as my ones with the lowered perches)

 

[karlj]

Heres mine with stock matiz fronts

 

[Jay101]

Heres mine with stock matiz fronts

If that's stock and I using the same But I'm missing two coils then I'm in trouble haha

 

[scottjames]

they,re about 50mm shorter scott, and about the same weight/strength spring, here,s craig,s matiz legs with about 3 coils off (about the same height as my ones with the lowered perches)

Looking good. Fancy a go at that, like the idea of lower but useable daily suspension

Scott

 

[Eire]

Quick question for anyone running the Matiz setup, It looks to be an ideal height but how firm is the suspension? Id be looking to track the car on a budget so the firmer the better without breaking the bank

 

[MrMigs08]

On the subject of 600+ coilies, what options are out there?

 

[Eire]

BC's and Meister R seem to be the best options but Matt sells Spax ones IIRC and there were a set of teins knockin about on here as well for a while, not sure who has them now though. There are other brands like D2 that also sell them and i've seen Cusco ones on Yahoo japan

 

[SK193]

These ones have come up on ebay again > BC Coilovers. They look really good for the money. I think the Tein coilovers that were for sale on here were bought by MikeyRocks iirc

 

[johnbr6]

How bouncy is the matiz set up?

 

[karlj]

How bouncy is the matiz set up?

Like stock