Breaking K11 1.0
- Thread starter sonic
- Start date
danimicra8
BabyBlueK11
I like those wing mirrors of yours, are your rear lights standard and what alloys do u have I spotted somewhere you mentioned changing them. Im looking to drop mine so any parts that would help that Id also like to know about.
OP
OP
I should point out that it's not my March that I'm breaking, it's a standard 1,0 suffering Natsitis.
No mate it's not got electric windows.
The rear lights are standard, and I dont have any alloys for sale at the moment, after Christmas I will probably be getting rid of my 15" Venoms with good 195/45s on as I'm going back to my 14"s (if they will fit over the Pulsar calipers), and the door mirrors are standard.
No mate it's not got electric windows.
The rear lights are standard, and I dont have any alloys for sale at the moment, after Christmas I will probably be getting rid of my 15" Venoms with good 195/45s on as I'm going back to my 14"s (if they will fit over the Pulsar calipers), and the door mirrors are standard.
OP
OP
Black plastic ones, but they can be sprayed quite easily.
danimicra8
BabyBlueK11
ah I thought it was the ones with the LED's in that u were breaking, no bother mate.
Is it 3 or 5dr?
Is it 3 or 5dr?
OP
OP
yep no problem, I can post, but I dont have the hubs, I put them on my March so I could use GTI-R brakes.
Primal_Concrete_Micra
Ex. Club Member
do you have any pics of the interior? are the rear seats split or one piece?
OP
OP
The interior is the same as Hooded Reapers car,
It would best suit a green or blue car imo, and the rear seat is a non split type.
Primal_Concrete_Micra
Ex. Club Member
how much you after for them, do the bottom half of the back seats fold forwards?
OP
OP
If you want it you can have it for £50, give me some notice of when you want it so I can get it out of the car.
The tailgates dented Kris, but you can have the bonnet as a swap for the rear axle with anti roll bar brackets.
OP
OP
Sorry I;'ve been told it won't fit straight into our s reg one
Why's that ? is yours a coil pack ignition ?
squarepants
Ex. Club Member
me and kristian (probs plenty of other people) ran 14'' alloys with pulsar cailpers
they will fit but the wheels looks really close to the caliper! but it doesnt cause any problems sonic s reg isnt a coilpack, its the same as mine facelift, so it will fit straight in
OP
OP
sonic s reg isnt a coilpack, its the same as mine facelift, so it will fit straight in
No, I didn't think it was coilpack, that was 2000 wasnt it ? it will definately fit straight in Chantuz.
squarepants
Ex. Club Member
think it was ither 2000 or 2001 plus...if it is an s-reg it will deffo fit straight in.
if it is a coilpack as said it will not as i think the loom is diffrent iirc.
Surprisingly Most aftermarket 14'' Alloys do fit, but only a few 14'' steelies do fit over the N15/N14 GTI/R caliper..
..Although the 14'' alloys are REALLY close..
Im after whatevers being scrapped.. Im not particularly after any parts, just panels that are left for modifying..
Thanks
..Although the 14'' alloys are REALLY close..
Im after whatevers being scrapped.. Im not particularly after any parts, just panels that are left for modifying..
Thanks
PeteST24
Ex. Club Member
OP
OP
Yes mate, I would, door cards as well ?
the bootlid you can have for £15, there is a small dent on it but it is easily repairable, the gearbox I would want to sell with the engine unless you want to split it yourself, I havent got time to split it myself really, so £60 for engine and box ? its done about 90000 but was regularly serviced.
£5 inc p+p sound ok ?
OP
OP
£5 posted ?
Both those prices sound great! Will the engine/box combo fit in the back of a K11 do you reckon? As if it doesnt I shall need to sort out alternative transport. Do you need a hand removing it or is it out? Consider it sold either way
