I am looking to lower my daily driver by 35mm. Do I need to use an adjustable panhard or will the standard be OK?
35mm lower, do I need to use an adjustable panhard
- Thread starter slowcarclub
- Start date
SteveG
Intake n exhaust almost done, suspension next :)
Get enough people in the back of the car, or load the boot up (or both) until the car lowers by 35mm... then see how the wheel to arch offset looks, and decide if it's acceptable. It's not really a lot, I found it starting offsetting past what I thought was ok at about 40-50mm lowered
Mine is lowered by that much, it has the standard panhard rod and is fine.
