I'ts been done, but I suspect that you;ll need low offset or spacing so the caliper fits in the largest part of the barrel.
I believe that those are 12" mini rims, banded and with micra 13" centres welded into the largest diameter inner section of the barrel.
fixoredBought a set of 12" Ultralites...
Got the back two on no problem, I'm using logic and hopeful thinking 50mm spacers will correct the fronts out and make them fit nicely!
I had 13" superlites on a 106, quite a different set up I know, but 5mm spacers on the fronts and a bit of shaving to the front caliper did the trick! I imagine you'll be fine, just gotta watch the shape of ultralights as the spokes can be a bit funky and rub bits.Bought a set of 12" Ultralites...
Got the back two on no problem, I'm using logic and hopeful thinking 5mm spacers will correct the fronts out and make them fit nicely!
heh you could test it out with washers eh luke (to asess how thick the spacers need to be)Cheers Frank ...its actually quite close