Search results

  1. .Maarten

    IMMOBILIZER ISSUE

    Tornado systems do a ecu rewrite where they disable nats.
  2. .Maarten

    Air induction kit.

    The group a airbox should give some gains. And this was one of the few that actually did. A group a airbox mounts next to the rad and is a ram air setup.
  3. .Maarten

    Air induction kit.

    No wont fit without buying more parts.
  4. .Maarten

    cable adjustment

    Nope. Its spring loaded so id clean and relube the hinges
  5. .Maarten

    High Idle (1100 rpm) Pre-facelift

    Engine hot. No load so lights/heater and such off.
  6. .Maarten

    High Idle (1100 rpm) Pre-facelift

    Yep that’s the tps and also that’s the idle screw
  7. .Maarten

    High Idle (1100 rpm) Pre-facelift

    Check the waxstat. And adjust the idle with the idle screw (hex) on the back of the throttlebody. Dont forget to unplug the tps and rev the engine a few times before setting the idle.
  8. .Maarten

    head light

    Check the connectors and the stalk
  9. .Maarten

    Central locking intermittently not working on both K11's!

    Water gets into the motors and rusting stuff up. You might find some info in Polly’s big topic
  10. .Maarten

    K11 4WD Parts

    Prolly still available from the dealer. Cube Z10 or March (Not micra) K11 both had the 4wd option (And share alot of parts drivetrain/suspention wise). Amayama lists it as available on their site but you prolly have to contact them for shipping due to it being a shock.
  11. .Maarten

    nats to non nats

    Yes but you also have to plug in a non nats ecu.
  12. .Maarten

    Intermittent juddering when engine gets warm.

    I would replace the dizzy with a known good one and try it.
  13. .Maarten

    Micra k11 - crank no start

    Warm up the engine. Make sure blowers and lights are off (no load on engine) pull off tps connector, rev engine a few times to 3k rpm. Check if idle rpm is around 650+-50 for manual and 700-750 for cvt. Adjust if needed. Hex bolt on the back of the throttle body. Loosen the 2 bolts that hold...
  14. .Maarten

    Rear Boots Handel broken

    Just get a good one from a scrapyard
  15. .Maarten

    Help needed after a crash.

    I would check some scrapyards for something in the same color and replace the airbag and seat belt. Might need a new airbag ecu but those can also be found on a scrapyard. Id just try the old one first. And get the car checked out by somebody that knows their stuff about frame damage to make...
  16. .Maarten

    My cars 100,000 service is due?

    I would just do the basics. Oil (10w40), spark plugs, distributor cap and rotor if there never been done, check the pcv valve and vacuumhoses and replace if needed. Flush coolant if that hasnt been done in the last 5 years and replace the brake fluid if that hasnt been done in the last few years.
  17. .Maarten

    Front anti-roll (stabiliser) bar drop link sheared.

    Id just cut them off. And yes all part stores should be able to get them. They are cheap.
Back
Top