Search results

I got the k10 1.2 as it goes straight in. And it was only £40 :)

I'll check and see if I have any 1.0l hubs and calipers etc.

As far as I'm aware the part numbers for the 1.0l and 1.3l pads are the same. Therefore same ones. And I doubt the hubs are any different. Last lot of pads and discs I got were £24 for all of it :P

Maybe take all the valves and things off and clean them with some intake cleaner?

Mine were off a pre facelift 98 SR. And they fitted with no problems! Are your hubs off a 98 onwards? Cos they have different gearboxes and maybe shafts?

Is it the butterfly that's sticking open, or just it's holding the revs up for a bit?

Any idea what the postage would be? :/

Have you got any kinda price in mind? :)

Did you go for the cheapy ones on eBay? And what do you think of them stiffness/ quality wise?

I usually do things the hard way first time and then realise after haha. Like my d/s engine mount is completely different too everyone else :/ What the coilovers off of pork?

Yeah that's what I did. But it got a little bit messy too get it all the way out.

8 psi :O Deffo need to get a map then! Haha

Love it! Wish I had a black one -.-

Umm haha. I made a mash of it with a grinder. But I'd say best thing would be to drill a pilot hole through the bottom and then use a hole cutter that's the right size!

'] A picture of my lower arm

Mine was scary with a boggo ma10 haha.

Should be a jem with those on! Unlike the usual boat :P

No unfortunately I haven't got round to doing a blog. If I'm honest it was a bit of a chore, Frank explained how he did his somewhere. The car still isn't on the road, and I'm not sure whether they're going to hold up. And in the end I welded the ball joints in and seam welded the whole...

I took the difficult option and drilled/grinded and welded my ball joints in and out of my wishbones haha. Let me know how much you have too slot your hubs

You put down k11 wishbones, I assume you know that will give you MASSIVE camber?! Haha But I can get a lot if that stuff at work. I can pm you with some prices?! :D