Micra preface loom rewiring interior need advice

[Azzydot]

I know there is 3 connectors near the Ecu 1 is black, 1 white and other ones brown, what am trying to do is keep the interior loom so like heater, headlights, signals. As taking the engine loom out I noticed there is few wires for inside loom going into the Ecu but how will I connect that and make it work ? So far fuel pump wire, and ignition wire, is ok, but there is 1 wire coming from the heater control and into the Ecu, do I just wire that with a relay ? 12+ ign

Sent from my iPhone using Tapatalk

 

[Azzydot]

Sent from my iPhone using Tapatalk

 

[Azzydot]

I can't find what is missing from the altarnator Orange wire there is a fuse and then which wire is missing near the fuse ? Anyone

 

[Agent_Sm1th]

I know mines a coilpack and different to yours but those wires you say go to the ECU, are they the ones that increase the rpm. If I switch my lights, ac, or heater on my idle increases. Don't think they're actually required, it just makes sure the alternator charges properly I think.

 

[Azzydot]

I know mines a coilpack and different to yours but those wires you say go to the ECU, are they the ones that increase the rpm. If I switch my lights, ac, or heater on my idle increases. Don't think they're actually required, it just makes sure the alternator charges properly I think.

The heater control only has one wire which is this only going into the Ecu ,

it's green/red .

On the alternator there is orange wire going into a fuse but the other side I think I chopped a wire off near the fuse as it's missing so I can't figure it out, looked on manual but showing a wire going into a relay from ingintion ?

 

[r-reg-sr]

loom colours changed a bit i heard.
this a 96-97 one,any use?

 

[Azzydot]

loom colours changed a bit i heard.
this a 96-97 one,any use?
View attachment 41458 View attachment 41459

That's same as mines but am looking for the altarnator side Of wiring which I think I cut by mistake and don't know which end goes to the fuse side, do u have a pic of the engine fuse box ? Thanks @r-reg-sr

 

[r-reg-sr]

 

[Azzydot]

View attachment 41461
View attachment 41462
View attachment 41463
View attachment 41463

I think u saved my life from stressing. U know the blue/white thick wire which fuse is that going into ?

 

[Azzydot]

 

[Azzydot]

@r-reg-sr I might just redo my wiring and leave a fuse in glove box and have it made neater, with a relay.

 

[Azzydot]

Orange wire from the altarnator will feed into a 10amp fuse and back into a ignition feed. And a live wire from altarnator to battery, all sorted think

 

[r-reg-sr]

white blue looks unlinked.

Goes to 2nd blue fuse from edge

to spade connector,first one near box edge

 

[Azzydot]

white blue looks unlinked.

View attachment 41506

Goes to 2nd blue fuse from edge
View attachment 41507

to spade connector,first one near box edge
View attachment 41508

I think ur fuse box is Diffrent to preface none Nats @frank

 

[Azzydot]

Ok can you check after you wired the fuse in and the wire from the altarnator what goes in other end of the fuse ?

 

[r-reg-sr]

must be it a 96-97 nuts one

 

[r-reg-sr]

Ok can you check after you wired the fuse in and the wire from the altarnator what goes in other end of the fuse ?

I haven't wired anything in . untouched loom this one.
What color you need?

 

[Azzydot]

must be it a 96-97 nuts one

The wiring in the fuse box are Diffrent to mines, but I can by pass the fuse over to ign works the same

 

[Azzydot]

I haven't wired anything in . untouched loom this one.
What color you need?

right can you see the Orange wire going into the fuse that is altarnator fuse but other side of fuse there is wire missing so I need to know where that wire is and where is goes

 

[r-reg-sr]

no orange going in these fuse box`S.
here is where mine go.

 

[Azzydot]

no orange going in these fuse box`S.
here is where mine go.
View attachment 41511
View attachment 41512
View attachment 41513

2 pictures are blank


Sent from my iPhone using Tapatalk

 

[r-reg-sr]

i can see them. try refresh page again

 

[Azzydot]

i can see them. try refresh page again

Got it thanks, right the Orange is defo going into fuse, and the red/yellow is going from altarnator to cluster that's the charge light


Sent from my iPhone using Tapatalk

 

[r-reg-sr]

hope it works. you building a submarine?

 

[Azzydot]

hope it works. you building a submarine?

I hope it does, Yeh building arcade with multi machines lol


Sent from my iPhone using Tapatalk

 

[r-reg-sr]

Where's the pinball soilenoid ?

 

[Azzydot]

Where's the pinball soilenoid ?

It's on my starter motor


Sent from my iPhone using Tapatalk