Removing Front Bumper.

[Littlewood]

Anyone got a diagram or something of where the bolts are?

 

[Arnold]

Four on the front, possibly one on each side. Take the grille out and you'l see them. You have to get under the car for the side ones

 

[Speedle]

2 10mm bolts per side on the facelift and 1 10mm bolt per side on the prefacelift

4; 13mm (facelift) or 12mm (prefacelift) bolts in the middle. you need to remove the grill in order to access the 4 main bolts

you can tell ive spent alot of time stripping k10's

 

[Littlewood]

Cheers guys, just went out to do it and two of the bolts have obviously been gone at before I got the car because there is no teeth left on them at all.. Just a circular hole :doh:.

Right Ive took out 1 bold on each edge, and 4 plastic ones from the front. But it still seems to be stuck fast :S.

 

[ollyc98]

Reverse past sommat and clip it with the front bumper, tears them straight off, or so I found out.

 

[Littlewood]

Reverse past sommat and clip it with the front bumper, tears them straight off, or so I found out.

Lmao. Might do in a bit , tis doing my head in.

 

[ollyc98]

If the bumper is rubbish I don't see why not lol.

 

[Arnold]

Once you've take the bolts out, that's pretty much it. There may be some plastic clips along the bottom which attach the bumper to the car, but these can be easily taken off. Otherwise, it should come out fine. Give it a bit of a bang!

 

[Speedle]

there may be another 2 10mm bolts on the side mate the facelift has 2 per side IIRC only the prefacelift has 1 per side (as the bumper is half the size)

if you pull the sides of the bumper they should come clear away from the wing if they dont youve missed some bolts once they are all out take out the indicators and unplug them, then give it a bloody hard pull and itll drop off

 

[Littlewood]

Got it off!

There were another two bolts each side, wjhich went ontpo some sur frame thingies.

Had to get under the car like, gone blind due to all the dirt flaking off and going in my eyes!