So much stuff going on recently, I hardly have time to post an update, so this will have to do for now. Calipers fully refurbished, got a set of TRW disks and pads to go in the front, also bought/ordered all the bits I need to finish her enough to be MOTable and capable of participating in a relly next weekend. All the plumbing stuff, switches, relays and a fuse box for the pump, grille lights and such, exhaust heat wrap, brake lines and fittings, fuel lines and filters, stainless steel tubing and bends for the intake manifold, vacuum lines and a ton of other junk I don't readily remember right now.
Car's at a friend's place right now, we're welding up a new stainless 2" exhaust system. Almost everything bar the final muffler is tacked together, just gotta finish it up tomorrow, while I install the brakes and new track rod ends and try to get the toe-in within reasonable limits. Afterwards I'll be visiting another friend to weld up the intake manifold and vacuum balance tank, then gotta put it all together and hope she starts. Hoping to get her started Monday-Tuesday, geometry, new tyres and MOT on Wednesday and then drive around a bit, try to get a feel for the car, etc.
Gonna be a busy week.
Oh also, I started learning CAD last week:
Intake manifold (hoping to make this one up myself)
Air filter mounting plates, speedo drive holder fix (the bolt part snapped at some point), laser cut
Distributor bracket/spacer, laser cut
Exhaust tip (also hoping to make this one up myself, preferably before the manifold to practice)
