wanted: wheels

euro_micra · May 28, 2011

Any 13" or 14" wheels considered with a 5.5j to a 7.5j width.

Would prefer them with tyres and ready to fit. But still open to just rims, rims that need refurb'ing etc.

Ideal wheels would be 13x6 with 155/60 tyres or 13x7 with 165/55 tyres, but like I said I'll consider anything.

Looking to spend £80-180 for the wheels. But can exceed that for the right rims/tyres.

Matt

.............

Wheels have to fit this drop btw. or maybe a little taller:wasntme:

So if the offset is too much the wheels will need to be wide enough to stretch tyres on, with the smallest tyre I want being 155/60. So my choices are slim I know that, but they are wheels out there.

.............

I'm also open to part exchange,

(4x)13x7 Mini/Ultralites with nearly brand new tyres.(link to thread)

Wheels on, arch trim not needed with neg. camber but no pic as of yet.

I'm looking for some different wheels to replace these ones, something with less dish ideally

(4x) 14x6(?) VW Wolfrace alloys, 2 fairly new tyres, 1 fairly used, 1 very worn tyre.

Best two have been repainted:

............

May even consider p/x with,

(4x)16x7 Strosek's with nearly new tyres.

or

(2x)13x6 Cobra Slotmags, new unused but large tyres.

Matt.

frank · May 28, 2011

i did a spare set of 14,s like mine

(£120) but they,re stock width and unpainted, and the tyres are,nt much cop

euro_micra · May 28, 2011

interesting frank, but I'm really looking for some 6/7js for a little stretch with the 155/165s on, and i'll need stretch at that offset

Thanks for the offer though pal. Have you got any others in the making, or planned?

frank · May 28, 2011

euro_micra said:
Have you got any others in the making, or planned?

widening them is a mission tbh mate

you need 2 wheels to make 1, and its a lot of cutting and welding
i just done some lightened et -15 x 13,s for the rear at the 1/4 mile, but i,m struggling to find some partworn 135 tyres tho

louismop1 · May 28, 2011

Dont want to sound like im hijacking this thread, sorry if it seems so, out of interest are the set of wheels your selling as wide as the ones in the red micra picture frank?

Cheers

Shaun · May 28, 2011

louismop1 said:
Dont want to sound like im hijacking this thread, sorry if it seems so, out of interest are the set of wheels your selling as wide as the ones in the red micra picture frank?

Cheers

They are the same i believe. stock width.

frank · May 28, 2011

louismop1 said:
Dont want to sound like im hijacking this thread, sorry if it seems so, out of interest are the set of wheels your selling as wide as the ones in the red micra picture frank?

Cheers

they,re all stock width louismop, just reversed

edit, like shaun said lol

Stani1029 · May 28, 2011

Frank do you know how wide a tyre you can get on them? 185?

louismop1 · May 28, 2011

No danger, thanks anyways chaps!

frank · May 28, 2011

Stani1029 said:
Frank do you know how wide a tyre you can get on them? 185?

they,ll fit ok stani, but they will look a bit balloon'y tho eh fwn

pollyp · May 28, 2011

i got a set of nissan 13" alloys

http://www.micra.org.uk/threads/373...ys-with-Yokohama-A-drive-175-70-13?highlight=

euro_micra · May 28, 2011

pollyp said:
i got a set of nissan 13" alloys

Thanks pollyp, but not my cup of tea n a bit too pricey for me. Looking for atleast a tad wider rim, and much smaller tyres. Thanks for replying to the post though(Y)

euro_micra · May 28, 2011

gtsnissanb · May 30, 2011

What about this
http://www.polleymotorsport.co.uk/polley/catalogue_wheels_final.asp?id=91&manufacturer=Weller Wheels

euro_micra · May 30, 2011

gtsnissanb said:
What about this
http://www.polleymotorsport.co.uk/polley/catalogue_wheels_final.asp?id=91&manufacturer=Weller Wheels

Too expensive, for me anyway. I know they're cheap for brand new, but I'd prefer to spend half as much on some 2nd hand wheels as I'm only going to get them curbed and scratched anyway.

micra.jas · May 30, 2011

still got my 13x7 superlights dude that i want to swap for your ultralights :wasntme:

gtsnissanb · May 30, 2011

euro_micra said:
Too expensive, for me anyway. I know they're cheap for brand new, but I'd prefer to spend half as much on some 2nd hand wheels as I'm only going to get them curbed and scratched anyway.

Fair enough I thought £250 was cheap for brand new wheels as banding costs nearly the same and alloys aren't much cheap if at all for decent width and offset

euro_micra · May 30, 2011

micra.jas said:
still got my 13x7 superlights dude that i want to swap for your ultralights :wasntme:

No sorry pal, don't really think the swaps worth it to me, I'll essentially be trading new tyres for paint, or have I missed something? And I'm lookng for something with less dish anyway.

gtsnissanb said:
Fair enough I thought £250 was cheap for brand new wheels as banding costs nearly the same and alloys aren't much cheap if at all for decent width and offset

Yeah I know it's cheap for new, but still expensive as they'll look used within a week of me using them, so doesn't make sense to me to buy them new if you know what I mean. I just want some cheap used wheels and tyres that will fit well that won't cost me more than I can afford really. Getting quite difficult though

gtsnissanb · May 30, 2011

euro_micra said:
No sorry pal, don't really think the swaps worth it to me, I'll essentially be trading new tyres for paint, or have I missed something? And I'm lookng for something with less dish anyway.

Yeah I know it's cheap for new, but still expensive as they'll look used within a week of me using them, so doesn't make sense to me to buy them new if you know what I mean. I just want some cheap used wheels and tyres that will fit well that won't cost me more than I can afford really. Getting quite difficult though

I get ya!
They do have a used wheels section maybe send an email, it's still under construction on the site but they may have used in stock

markbognor · May 30, 2011

Stupid money, but there's no doubting how cool they are!

http://retrorides.proboards.com/index.cgi?board=pfsw&action=display&thread=105028

euro_micra · May 30, 2011

Not bad. Look in pretty good condition too. Price is reasonable I think, still more than what I want too pay:doh:

Still scouring ebay for a bargain, but nothing much on that I'm willing to part cash for, there's some options though, ronal teddys, 5 spoke revolutions, starmags, mattigs, banded vw steels. And I do like these but they're in the isle of man.

euro_micra · Jun 12, 2011

BUMP
&
edited

I'm still looking.

superls · Jun 13, 2011

my 13x7 capri wheels are still available

euro_micra · Jun 13, 2011

superls said:
my 13x7 capri wheels are still available

I was very tempted by them, and I think I might take them

I was unsure that they'd fit under the arches though, espiecally the rear with stock camber, but I could always make them fit.

How much do you want for them(&spigots, nuts etc.) in cash, picked up?

superls · Jun 14, 2011

euro_micra said:
I was very tempted by them, and I think I might take them
I was unsure that they'd fit under the arches though, espiecally the rear with stock camber, but I could always make them fit.

How much do you want for them(&spigots, nuts etc.) in cash, picked up?

they fit fine under arches, mine has stock camber on the back with no issues.

tell you what, if you come for them this week, you can have nuts spiggots and wheels/tyres for £160

wanted: wheels

Matt :)

Attachments

Matt :)

Attachments

***StaGGeRed***

Matt :)

Matt :)

Matt :)

Matt :)

Ex. Club Member

Matt :)

Matt :)

K10 Tuner

Matt :)

K10 Tuner

Similar threads

StaGGeRed