Please only use these forums for blogs, they are not a discussion forum

Reply to thread

Message

I was really worried about it and was going to get @[USER=15583]Enuo[/USER] to make some spacers. But in reality I updated from a 10mm to a 12mm higher tensile strength bolts. I don't thing the originals were all that hardcore but I am using 8.8 now. And used the extra nuts to stop the movement as best as possible. When I have a welder I will make an extra bracket and basically reproduce the original design but on the new axle side used. I won't be hauling much heavy with this setup but we shall see. I may hookup a go pro and see what movement there is.

[QUOTE="SirChris, post: 694516, member: 14381"] I was really worried about it and was going to get @[USER=15583]Enuo[/USER] to make some spacers. But in reality I updated from a 10mm to a 12mm higher tensile strength bolts. I don't thing the originals were all that hardcore but I am using 8.8 now. And used the extra nuts to stop the movement as best as possible. When I have a welder I will make an extra bracket and basically reproduce the original design but on the new axle side used. I won't be hauling much heavy with this setup but we shall see. I may hookup a go pro and see what movement there is. [/QUOTE]

Verification