Yesterday I carefully oiled all the pivot points on the roof frame which then oddly created a creaking noise during operation. Today I showed the car to a friend and he asked whether it should go flatter in the open position. Think he pushed it down a little and now it's stuck there. Switch causes a little click Open or Closed, which sounds like a relay. There is no sound at all from the rear from a motor trying to operate. When you try to lift the main arms manually, that creak comes from around the main pivot on one side. Is there a safety cutout which engages when there are mechanical difficulties and is there any manual override? Have sprayed rust release on the main pivots but don't have much faith in it curing the problem. Have a cover over it, but rain coming tomorrow.
